You are here: Home > Liquid Tight Cable Glands > Nickel Plated Brass Dome Fittings > PG Nickel Plated Brass Dome Fittings > PG EMI/RFI Proof Brass Dome Fittings
Dome Fittings
Part Numbers Cable Range Thread Range
EMI/RFI Proof Inches (mm)
CD07AA-BE .12" - .26" (3 - 6.5 mm) PG 7 / 1/4" NPT
CD07AR-BE .08" - .20" (2 - 5 mm) PG 7 / 1/4" NPT
CD09AA-BE .16" - .31" (4 - 8 mm) PG 9
CD09AR-BE .08" - .24" (2 - 6 mm) PG 9
CD11AA-BE .20" - .39" (5 - 10 mm) PG 11
CD11AR-BE .12" - .28" (3 - 7 mm) PG 11
CD13AA-BE .24" - .47" (6 - 12 mm) PG 13 / 13.5
CD13AR-BE .20" - .35" (5 - 9 mm) PG 13 / 13.5
CD16AA-BE .39" - .55" (10 - 14 mm) PG 16
CD16AR-BE .28" - .47" (7 - 12 mm) PG 16
CD21AA-BE .51" - .71" (13 - 18 mm) PG 21
CD21AR-BE .35" - .63" (9 - 16 mm) PG 21
CD29AA-BE .71" - .98" (18 - 25 mm) PG 29
CD29AR-BE .51" - .79" (13 - 20 mm) PG 29
CD36AA-BE .87" - 1.26" (22 - 32 mm) PG 36
CD36AR-BE .79" - 1.02" (20 - 26 mm) PG 36
CD42AA-BE 1.26" - 1.50" (32 - 38 mm) PG 42
CD42AR-BE .98" - 1.22" (25 - 31 mm) PG 42
CD48AA-BE 1.46" - 1.73" (37 - 44 mm) PG 48
CD48AR-BE 1.14" - 1.38" (29 - 35 mm) PG 48
CD07AA-FE .12" - .26" (3 - 6.5 mm) PG 7 / 1/4" NPT
CD09AA-FE .16" - .31" (4 - 8 mm) PG 9
CD11AA-FE .20" - .39" (5 - 10 mm) PG 11
CD13AA-FE .24" - .47" (6 - 12 mm) PG 13 / 13.5
CD16AA-FE .39" - .55" (10 - 14 mm) PG 16
CD21AA-FE .51" - .71" (13 - 18 mm) PG 21
CD29AA-FE .71" - .98" (18 - 25 mm) PG 29
CD36AA-FE .94" - 1.26" (24 - 32 mm) PG 36
CD42AA-FE 1.26" - 1.50" (32 - 38 mm) PG 42
CD48AA-FE 1.46" - 1.73" (37 - 44 mm) PG 48
Sort By:
Page of 2
   
 

EMI Proof PG Nickel Plated Brass Cable Glands

Sealcon PG size nickel plated brass cable glands with EMI / RFI protection are available in PG 7 to PG 48 sizes. They are perfect for use in telecommunications, control panels, and feedback system applications. Like other Sealcon cord grips, they have overlapping splines that create an even seal, which keeps the form seal from being pulled out of the fitting. They have either reduced or standard inserts, which are interchangeable to accommodate different cable diameters. The standard version (-BE) is only used with a braided shield, while the feed through version (-FE) works with a braided or foil shield. PG refers to Panzer-Gewinde, which is a German thread type.