Form A DIN 43650 EN 175301-803 Connectors
DIN 43650 Form A connectors are classified by three "U" shaped pins facing inwards and the 18 mm measurement between pins #1 & #2.
DIN 43650 standards are a set of standards developed by Deutsches Institut fur Normung e.V. (DIN), the German Institute for Standardization. This is also labeled as ISO 4400 (the International Organization for Standardization) and EN 175301-803 (European Standards) when describing these connectors.
Form A DIN connectors are mostly used with solenoid valves for a secure and water resistant method for applying power. The Din 43650 connectors are found in hydraulics and pneumatics applications as well as pressure sensors and switches, optical, limit and proximity switches, and marine applications.
There are many types of Form A DIN solenoid valve connectors handled by Major Electronix. Also referred to as sensor connectors, they are water resistant and can feature several options. Surge suppression, diodes and various lengths of molded cable can be added to Form A DIN connectors from a number of different manufacturers, including Hirschmann, HTP, MURR and Omal.
Form A male connectors are be either 2 + ground or 3 + ground, and are mostly panel mount or for molding. The hardwired Form A connectors feature PG 9 or PG 11 cable entries, as well as 1/2" NPT for conduit. The HTP hardwired connectors have a removable unified grommet to accommodate a 5-10 mm range of cable. DIN 43650 Form A connectors with molded cable are 3 + ground or 2 + 2 ground and can come with 1, 2, 3, 5 or 10 meter cable lengths. Circuited versions of the hardwired and molded connectors have options including an LED indicator to confirm the voltage supply and MOV surge suppression or diodes to give overvoltage protection to the source and load. The M12 DIN connectors are fitted to an M12 receptacle or molded cable plug, with circuit options available. Various Form A DIN 43650 connectors can also have more specialized circuits, including features such as Z-diodes to redirect surges, RCs to absorb & discharge surges, bridge rectifiers to convert AC to DC, and switching amplifiers to control the output.
DIN 43650 Form A Connector Articles
9/12/2016 - DIN 43650 Connector and Custom Connector Assemblies
7/26/2016 - New Generation Hirschmann DIN 43650 Connectors
1/8/2016 - Specialty HTP DIN 43650 Valve Connectors
2/7/2014 - DIN 43650 Connectors with Circuits
10/9/2013 - DIN 43650 Solenoid Valve Connectors
5/10/2013 - Hirschmann DIN Form A GDM 2012 J
4/22/2013 - MURR Form A Specialty DIN Connectors
4/17/2013 - DIN 43650 Form A to M12 Connectors
4/8/2013 - OMAL DIN 43650 Connectors from Mencom
11/9/2011 - Hirschmann MESAP Test Adapter to DIN 43650 Form A Standard