 |
Sealcon CD07AR-BE, Nickel Plated Brass, EMI/RFI Proof Cord Grip, 1/4" NPT / PG 7, Cable OD .08" - .20" (2 - 5 mm)
CD07AR-BE emi/rfi proof cord grip / cable gland with Nickel Plated Brass Material with Buna-N Seal & Nylon 6/6 Splined Bushing, 1/4" NPT / PG 7 thread, .08" - .20" (2 - 5 mm) cable OD range, NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating.
Why Choose the Sealcon CD07AR-BE Cable Gland?
The Sealcon CD07AR-BE, also known as Hummel 1.691.0700.15, is a Nickel Plated Brass emi/rfi proof cord grip / cable gland designed to secure cable entry points in demanding equipment and enclosure applications. It uses a 1/4" NPT / PG 7 thread, fits cable O.D. .08" - .20" (2 - 5 mm) and has a .49" (12.5 mm) through-hole diameter. Environmental sealing is listed as Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating.
Use this fitting for telecommunications, control panels, traffic and measuring and feedback systems. Its design supports resistance to salt water, acids, alkalis, gasoline, and oils, Flame Protected to UL 94, Halogen and Phosphorous Free, insert modularity for adjusting cable openings and EMI/RFI shielding support for braided cable.
🔩 Threaded Cable Entry
1/4" NPT / PG 7 thread with .49" (12.5 mm) through-hole diameter
🛡️ Environmental Seal
NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating
⚙️ Material Construction
Nickel Plated Brass Material with Buna-N Seal & Nylon 6/6 Splined Bushing
📡 EMI/RFI Protection
For braided shield cable and grounding continuity
⚠️ Confirm Cable Fit and Accessories
Locking nut sold separately. Confirm the cable outside diameter is within the .08" - .20" (2 - 5 mm) range before ordering.
📋 Application and Rating Details
The Sealcon CD07AR-BE is built for cable strain relief, sealing, and panel entry applications where thread fit, cable diameter, material, and environmental rating must match the installation.
Rating: Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating
Chemical Resistance: Resists salt water, acids, alkalis', gasoline & oils.
Modularity: Standard and reduced inserts can be swapped to adjust the cable opening.
Shielding Use: Designed for braided shield cable where EMI/RFI protection and grounding continuity are required.
Key Features & Benefits
- 1/4" NPT / PG 7 thread size
- Cable O.D. range: .08" - .20" (2 - 5 mm)
- Through-hole diameter: .49" (12.5 mm)
- Nickel Plated Brass Material with Buna-N Seal & Nylon 6/6 Splined Bushing
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Technical Specifications
|
Product Code
|
CD07AR-BE
|
|
Vendor Part Number
|
CD07AR-BE
|
|
Hummel Number
|
1.691.0700.15
|
|
Brand
|
Sealcon / Hummel
|
|
Product Type
|
EMI/RFI Proof Cord Grip / Cable Gland
|
|
Material / Seal
|
Nickel Plated Brass Material with Buna-N Seal & Nylon 6/6 Splined Bushing
|
|
Color / Finish
|
Nickel Plated Brass
|
|
Thread Size
|
1/4" NPT / PG 7
|
|
Cable O.D. Range
|
.08" - .20" (2 - 5 mm)
|
|
Through Hole Diameter
|
.49" (12.5 mm)
|
|
Body Length
|
.75" (19 mm)
|
|
Thread Length
|
.2" (5 mm)
|
|
Wrench Flat Dome
|
.55" (14 mm)
|
|
Wrench Flat Body
|
.55" (14 mm)
|
|
Environmental Rating
|
Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
|
|
Pressure Rating
|
150 psig (10 bar) Pressure Rating
|
|
Flame Rating
|
Flame Protected to UL 94
|
|
Compliance / Approvals
|
RoHS Compliance, Deca Bde Deca-Bromo-Diphenyl-Ether Compliance, Registration, Evaluation, Authorization and Restriction of Chemicals, Waste Electrical and Electronic Equipment Directive, EAC, CE, German Lloyd
|
|
Sold As
|
Each / Sold Individually
|
|
Accessories
|
Locking nut sold separately
|
📋 Basic Installation Overview
1. Confirm Thread: Verify the enclosure or panel opening matches the 1/4" NPT / PG 7 thread and .49" (12.5 mm) through-hole requirement.
2. Match Cable Size: Use cable within the .08" - .20" (2 - 5 mm) outside diameter range.
3. Seat the Seal: Tighten the dome so the clamping insert applies even pressure around the cable without damaging the jacket.
4. Maintain Rating: Use the correct accessory hardware and install to the application requirements to support the listed IP/NEMA rating.
5. Final Check: Inspect the cable entry for pull-out resistance, seal compression, and proper panel fit before operation.
Always verify the Sealcon CD07AR-BE dimensions, cable O.D. range, and accessory requirements before installation.
📞 Sealcon / Hummel Product Support
Sealcon Cable Gland Support:
For help matching the CD07AR-BE to a cable diameter, thread size, enclosure material, IP/NEMA rating, or replacement cross reference, contact us before ordering.
Sealcon / Hummel cord grips are used for industrial cable entry, strain relief, and liquid-tight sealing in panels, machinery, and harsh-duty equipment.
|
|
|
