The Red Lion Sixnet® Series SL-6RS-5SCL-D1 is an six port Industrial Ethernet Ring Switch with monitoring. Housed in a Lexan DIN rail enclosure, t
his SlimLine SL series switch features 60km singlemode fiber optic cable with an SC style fiber connector. It features Real-Time Ring for network redundancy and prioritized message delivery for important systems. It self-configures, so there is no need to go through a process of configuration during set-up. Pre-configuration ensures plug and play capability. It is designed to stand up to the demands of industrial networks. The compact SlimLine housing ensures that it won't take up much room, leaving more available space on the DIN-Rail.
The fault tolerant ring technology has a 30 mS recovery time, plus 5 mS per hop. It's perfect for use in deterministic systems and PLCs, and features Modbus over Ethernet monitoring. The QoS, or prioritizing of traffic, gives you data in real time. It helps with network operation and allows the operator to create their own priority settings.
PRODUCT FEATURES
- Real-Time Ring Protocol
- Compact Housing
- Full IEEE 802.3 Compliance
- 6 Ports: Four RJ45 ports, two fiber ports
- Extended Environmental Specifications
- -40 C to 60 C Operating Temperature
- >1M+ Hours MTBF
- Supports Full/Half Duplex Operation
- LED Link/Activity Status Indication
- Auto Senses Speed and Flow
- MDIX Auto Sensing Cable
- Redundant Power Inputs (10-30 VDC)
- Power Inputs with Surge Protection
- Lexan DIN-Rail enclosure
- Self-test/alarm output contact
- User configurable port settings
- Port mirroring for traffic diagnostics
- Message filtering prevents broadcast storms
- UL/CSA (CUL), CE & Hazardous Locations (Zone 2) rated (pending)
6 Port Ring Switch SL-6RS-5SCL-D1
Ethernet Performance
Managed, Store & Forward, Wire Speed
Automatic Learning, Aging, Migration for Addresses
Typical Latency for 10Mbps Ports: 16 us + frame time- varies on load
Typical Latency for 100Mbps Ports: 5 us + frame time- varies on load
Full/Half Duplex Operation configurable per port
MAC Addresses supported: 2048
Memory Bandwidth: 3.2 Gbps
Ethernet Isolation: 1500 VRMS 1 min
Shielded RJ45 Ports: 10/100BaseTX
RJ45 Port Speed Auto-negotiation
RJ45 MDI/MDIX Auto-crossover
RJ45 TD & RD Auto-polarity
Fiber optic port speed: 100BaseFX (100 Mbps)
Typical Fiber port wavelength: 1310 nm
Typical Singlemode fiber: 9-10/125 um SC
Fiber Max Distance: 60 KM
Ethernet Compliance
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3u (Fast Ethernet 100Mbps for new devices)
IEEE 802.3x (Full-Duplex with flow control)
IEEE 802.3p (Priority Queuing - QoS, CoS, ToS/DS)
Real Time Ring
Link loss recovery: 30 mS plus 5 mS per hop
Switches in a ring: <50 for best performance
Multiple rings supported (configurable)
OK Alarm Output
Indicates status of power and operations
Voltage equals switch input voltage
Maximum current: 0.5 A
Power Input
Reverse polarity protection
Typical Input Power: 6 W (all ports active)
Transient Protection: 15,000 watts peak
Spike Protection: 5000 watts (10 times for 10 uS)
Environmental
Operating Temperature: -40 C to 60 C
Storage Temperature: -40 C to 85 C
Humidity (Non-Condensing): 5 to 95% RH
Vibration & Shock: IEC60068-2-6, -27
Standards Compliance
Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE
EMC: FCC Part 15, ICES-003, EN61000-6-2/4, CE
Hazardous Locations: UL 1604/CSA C22.2/213 (Class I, Div 2),
EN60079-15 (Zone 2, Category 3), CE (ATEX)
Maritime: Marine & Offshore per ABS
RoHS & WEEE Compliant
Physical
DIN-Rail or Panel Mount
Dimensions: 4.2" H x 1.5" W x 3.72" L
Case: Lexan rated IP 40
|
