The Sixnet SLX-6RS-5ST-D1 is an six port Industrial Ethernet Ring Switch. This SlimLine SLX series switch is housed in an aluminum DIN rail enclosure, and features 20km singlemode fiber optic cable with an ST style fiber connector. It has four 10/100BaseTX RJ45 ports and two 100BaseFX fiber optic ports. It includes Real-Time Ring for network redundancy and priority message delivery for crucial systems. It self-configures, so there is no need for a configuration process during installation. The pre-configuration ensures its plug and play capability. It is made to meet the demands of industrial networks. The SlimLine housing is compact, so it won't take up much room, leaving more space on the DIN-Rail.
The fault tolerant ring technology has a 30 mS recovery time, plus 5 mS per hop. It's perfect for use in deterministic systems and PLCs, and features Modbus over Ethernet monitoring. The QoS, or prioritizing of traffic, gives you data in real time. It helps with network operation and allows the operator to adjust their own priority settings.
PRODUCT FEATURES
- Real-Time Ring Protocol
- Compact Housing
- Full IEEE 802.3 Compliance
- 6 Ports: Four RJ45 ports, two fiber ports
- Extended Environmental Specifications
- -40 C to 85 C Operating Temperature
- >1M+ Hours MTBF
- Supports Full/Half Duplex Operation
- LED Link/Activity Status Indication
- Auto Senses Speed and Flow
- MDIX Auto Sensing Cable
- Redundant Power Inputs (10-30 VDC)
- Power Inputs with Surge Protection
- Rugged metal DIN-Rail enclosure
- Self-test/alarm output contact
- User configurable port settings
- Port mirroring for traffic diagnostics
- Message filtering prevents broadcast storms
- UL/CSA (CUL), CE & Hazardous Locations (Zone 2) rated (pending)
Sixnet Singlemode Fiber Ethernet Ring Switch SLX-6RS-5ST-D1
Ethernet Performance Managed, Store & Forward, Wire Speed Typical Latency for 10Mbps Ports: 16 us + frame time- varies on load Typical Latency for 100Mbps Ports: 5 us + frame time- varies on load Full/Half Duplex Operation configurable per port MAC Addresses supported: 2048 Memory Bandwidth: 3.2 Gbps Ethernet Isolation: 1500 VRMS 1 min Shielded RJ45 Ports: 10/100BaseTX RJ45 Port Speed Auto-negotiation RJ45 MDI/MDIX Auto-crossover RJ45 TD & RD Auto-polarity Fiber optic port speed: 100BaseFX (100 Mbps) Typical Fiber port wavelength: 1310 nm Typical Singlemode fiber: 9-10/125 um ST Fiber Max Distance: 20 KM Ethernet Compliance IEEE 802.3 (10Mbps Ethernet supports legacy devices) IEEE 802.3u (Fast Ethernet 100Mbps for new devices) IEEE 802.3x (Full-Duplex with flow control) IEEE 802.3p (Priority Queuing - QoS, CoS, ToS/DS) Real Time Ring Link loss recovery: 30 mS plus 5 mS per hop Switches in a ring: <50 for best performance Multiple rings supported (configurable) OK Alarm Output Indicates status of power and operations Voltage equals switch input voltage Maximum current: 0.5 A Power Input Reverse polarity protection Typical Input Power: 6 W (all ports active) Transient Protection: 15,000 watts peak Spike Protection: 5000 watts (10 times for 10 uS) Environmental Operating Temperature: -40 C to 85 C (cold startup -40 C) Storage Temperature: -40 C to 85 C Humidity (Non-Condensing): 5 to 95% RH Vibration & Shock: IEC60068-2-6, -27 Standards Compliance Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE EMC: FCC Part 15, ICES-003, EN61000-6-2/4, CE Hazardous Locations: UL 1604/CSA C22.2/213 (Class I, Div 2), EN60079-15 (Zone 2, Category 3), CE (ATEX) Maritime: Marine & Offshore per ABS RoHS & WEEE Compliant Physical DIN-Rail or Panel Mount Dimensions: 4.5" H x 1.5" W x 3.79" L Case: Corrosion resistant aluminum, rated IP 40
|