Home > Liquid Tight Cable Glands > Nickel Plated Brass Flex Fittings > NPT Nickel Plated Brass Flex Fittings > NPT EMI/RFI Proof Brass Flex Fittings >

Sealcon CF09NR-BE 3/8" NPT Flex .08" - .24" (2 - 6 mm) EMI/RFI Proof Cord Grip

Sealcon CF09NR-BE
Sealcon CF09NR-BE 3/8" NPT 2 - 6 mm EMI/RFI Proof Cord Grip

Alternative Views:

Our Price: $20.00
MFG: Sealcon
Weight (lbs): 0.1

Product Code: CF09NR-BE


Sealcon CF09NR-BE high quality EMI/RFI Proof nickel plated brass cord grip is liquid tight to 150 psi. 3/8" NPT thread, Accommodates .08" - .24" (2 - 6 mm) O.D cable. Sold Individually. (Locking nut sold separately) Also known as Hummel #1.624.3800.71.

Thread Size/Type 3/8" NPT
  • Nickel Plated Brass Material with Stainless Steel Spring, Buna-N Seal & Nylon 6/6 Splined Bushing
  • Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
  • 150 psig (10 bar) Pressure Rating
  • Flame Protected to UL 94
  • Halogen and Phosphorous Free
  • Resists salt water, acids, alkalis', gasoline & oils.
  • Durable Rugged Construction
  • RoHS & Deca BDE, CSA approval
Through Hole Dia. .6" (15.2 mm)
Body Length 2.6" (66 mm)
Thread Length .59" (15 mm)
Wrench Flat Dome/Body .67" (17 mm) / .75" (19 mm)

Sealcon CF09NRBE Nickel Plated Brass cable glands, strain relief fittings, or cord grips, are used in almost every industry to assist customers when connecting cable or wire to various applications. This cord grip provides a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Note: Image is for reference only, actual part many differ

This Nickel Plated Brass fitting with 3/8" NPT thread lets you adjust the size of the cable opening by switching out the standard or reduced inserts. The self locking ACME thread on the flex top ensures that the overlapping splines create an even seal. This prevents the form seal from being pulled out of the fittings & gives your cable pull-out protection so it causes no damage. Using a flex top eliminates kinking or chafing of the cable. EMI/RFI Proof cable gland meet the requirements for electromagnetic interference protection and reliable grounding. This standard version presses braiding against the inside wall by means of the integrated O-Ring. This cord grip can only be used with a braided shield. Application examples include telecommunications, control panels, traffic and measuring, and feedback systems.

  • RoHS Compliance
  • Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
  • Registration, Evaluation, Authorization and Restriction of Chemicals
  • Waste Electrical and Electronic Equipment Directive
  • UL / CUL Listed
  • UL Registered
  • EAC
  • CE
  • German Lloyd

CF09NR-BE Sealcon Nickel Plated Brass Flex 3/8" NPT Cord Grip

Additional Product Information

Sealcon NPT Flex Cable Glands Comparison Chart