The Red Lion Sixnet ^® Series SLX-5EG-2SFP is a 5 port unmanaged Gigabit capable Ethernet Power over Ethernet (PoE) Switch. This SlimLine Plus SLX series switch is housed in an aluminum DIN-Rail enclosure & features three 10/100/1000BaseTX RJ45 ports that support PoE, and two Mini GBIC transceiver ports. It is made to work at an efficient speed for real-time operation and data transference, as well as to withstand the conditions of industrial networks. The switch is ready to go immediately, without requiring a user set-up or configuration, due to its plug and play ability. This switch works well in applications such as video & security, transportation, oil & gas, maritime, and mining. Comes with a 5 year warranty on defects in manufacturing or design.

PRODUCT FEATURES

• Compact housing
• Unmanaged plug and play operation
• Full IEEE 802.3 Compliance
• 5 Ports: Three RJ45 ports supporting IEEE 802.3af (PoE), two Mini GBIC transceiver ports
• Extended Environmental Specifications
• -40 C to 85 C Operating temperature
• >1M+ Hours MTBF
• Supports Full/Half Duplex Operation
• LED link/activity status indication
• Auto senses speed and flow
• MDIX auto sensing cable
• Redundant Power Inputs (10-30VDC non PoE, 45-56VDC PoE)
• Power inputs with surge protection
• Rugged Metal DIN-Rail Enclosure
• Hazardous Locations (Class I, Division 2 and Zone 2) rated

Red Lion Sixnet SLX-5EG User Manual

Red Lion Sixnet SLX-5EG-2SFP Ethernet PoE Switch

Ethernet Performance
Unmanaged, Store & Forward Wire Speed Switching, Non-blocking
Full/Half Duplex Operation with flow control
MAC Addresses supported: 1024
Memory Bandwidth: 32 Gbps
Typical Latency for 10Mbps Ports: 16 us + frame time
Typical Latency for 100Mbps Ports: 5 us + frame time
Typical Latency for 1000Mbps Ports: 3 us + frame time
Jumbo frames: Up to 10K
Ethernet Isolation: 1500 VRMS 1 min
RJ45 Copper Ports
RJ45 Ports: 10/100/1000BaseTX
RJ45 MDI/MDIX Auto-crossover
RJ45 TD & RD auto-polarity
Auto detects speed & duplex settings
SFP Ports
2 SFP ports accommodate Mini GBIC transceivers, 1000 Mbps
Power Input
Power consumption (no PoE): 6.2 W (with 2 fiber)
Power consumption (with PoE): Up to 15.4 W per port
Power consumption max: 53 W with 3 fully loaded PoE ports
Transient Protection: 15,000 watts peak
Spike Protection: 5000 watts (10 times for 10 uS)
PoE Output (Ports 1-3)
Classification: PSE (power sourcing equipment)
PoE voltage: 45-48VDC depending on power input
PoE RJ45 pin assignments: TX/V- (3, 6) RX/V+ (1, 2)
PoE operation: Automatic detection and power management
Disconnect mode: AC Disconnect
Protection: Over temp, over current, over/under voltage, transient
Standards & Compliance
IEEE 802.3u, IEEE 802.3, IEEE 802.3x
Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE
EMC: FCC Part 15, ICES-003, EN61000-6-4, EN61000-6-2, CE
Hazardous Locations: ISA 12.12.01, CSA C22.2/213 (Class I, Div 2),
EN60079-15 (Zone 2, Category 3), CE (ATEX)
Maritime/Marine/Offshore
NEMA TS-2 for traffic control systems
RoHS and WEEE Compliant
Environmental
Operating Temperature: -40 C to 85 C (cold startup -40 C)
Storage Temperature: -40 C to 85 C
Humidity (Non-Condensing): 5 to 95% RH
Vibration & Shock: IEC60068-2-6, -27
Physical
DIN-Rail or panel mount
Dimensions: 5.26" H x 1.77" W x 4.22" L
Case: Corrosion-resistant aluminum, rated IP 40