 |
 |
 |
|
LiteCycle SG-PB-3002-Y 2-Position 30 mm Yellow Push Button Control Enclosure, IP65
High-visibility 2-position industrial push button enclosure with a yellow molded-resin faceplate, black PBT base, 30 mm operator openings, and durable control-station construction.
Why Choose the LiteCycle SG-PB-3002-Y Push Button Enclosure?
The LiteCycle SG-PB-3002-Y is a 2-position push button switch box built for compact industrial control stations. Its caution-yellow molded-resin faceplate improves visibility around machinery, while the black PBT Plastic housing provides a durable mounting base for 2 30 mm push button devices.
Counter-rotating cover locks and molded entry provisions simplify assembly and service access. The enclosure is rated IP65 for protection in demanding control environments. The 135 mm L X 80 mm W X 70 mm H (5.31" x 3.15" x 2.76") enclosure provides a clean, organized housing that keeps the operator controls grouped in one compact station.
🎛️ 2 Control Positions
Provides 2 dedicated openings for compatible 30 mm push button devices
🟨 Yellow Molded Faceplate
High-visibility molded-resin faceplate helps the control station stand out
🧰 30 mm Device Openings
Designed specifically for industrial push button and operator-station assembly
🛡️ IP65 Enclosure
Provides dust and water protection when installed with compatible components
⚠️ Confirm Operator and Cable-Entry Compatibility
This enclosure is designed around 30 mm operator openings. Before assembly, verify the dimensions of the push buttons or control devices, the mounting depth behind the faceplate, cable entry opening, and thread size of PG 13.5. Choose cable-entry hardware and wiring methods that match the installation environment. To maintain the listed IP 65 performance, all installed operators, cable-entry fittings, and cover seals must be properly rated and assembled.
⚠️ High-Visibility Control Station
The yellow faceplate helps distinguish this operator station from surrounding equipment and standard black enclosures. It is well suited to caution-related controls, machine functions, and control points that should be easy for operators or maintenance personnel to locate.
Key Features & Benefits
- 2-position layout for 30 mm operator devices
- Yellow Molded Resin for high control-station visibility
- Black PBT Plastic housing
- Counter-rotating cover locks support secure closure and service access
- Molded entry provisions simplify cable routing and enclosure preparation
- Ingress protection: IP 65
- Overall dimensions: 135 mm L X 80 mm W X 70 mm H (5.31" x 3.15" x 2.76")
- Oil-resistant construction supports routine cleaning around industrial equipment
- This two-position enclosure is a practical choice for paired machine controls, such as start/stop functions or another two-device operator arrangement. The compact housing keeps both controls in one visible station while protecting the rear wiring area.
Technical Specifications
|
Dimensions
|
135 mm L X 80 mm W X 70 mm H (5.31" x 3.15" x 2.76")
|
|
Housing Color
|
Black
|
|
Base Material
|
PBT Plastic
|
|
Face Plate
|
Yellow Molded Resin
|
|
Push Button Entry
|
30 mm
|
|
Wire Entry
|
Molded Knockout
|
|
Entry Opening
|
22 mm
|
|
Maximum Size
|
PG 13.5
|
|
Positions
|
2
|
|
Ingress Protection
|
IP 65
|
📋 Push Button Enclosure Installation Overview
1. Confirm the Layout: Verify that the planned devices use 30 mm mounting openings and fit within the available enclosure depth.
2. Prepare the Cable Entry: Open or use the molded entry provision without damaging the enclosure body, then install the correctly sized cable-entry fitting.
3. Install the Operators: Mount the push buttons or compatible operators in the faceplate and tighten them according to the device manufacturer’s instructions.
4. Complete the Wiring: Route conductors neatly, maintain adequate clearance, and keep wiring away from the cover-locking areas.
5. Close and Inspect: Reinstall the cover, engage the counter-rotating locks, and verify that the enclosure closes evenly before placing the station into service.
|
|
|
 |
|
 |
|
