 |
 |
 |
|
LiteCycle SG-PB-3002-R 2-Position 30 mm Red Emergency Stop Push Button Enclosure, IP65
High-visibility industrial emergency stop enclosure with two 30 mm operator openings, a durable PBT base, red molded-resin faceplate, molded cable-entry knockout, and IP65 protection.
Why Choose the LiteCycle SG-PB-3002-R Emergency Stop Enclosure?
The LiteCycle SG-PB-3002-R is a 2-position industrial push button enclosure designed for emergency stop stations and other safety-related control points. Its red molded-resin faceplate makes the control station easier to identify, while the black PBT housing provides a durable base for two 30 mm push button devices.
Counter-rotating cover locks, molded cable-entry provisions, oil resistance, and an IP65 enclosure rating support installation on machinery and industrial equipment. The compact 135 mm L X 80 mm W X 70 mm H (5.31" x 3.15" x 2.76") housing helps create a clearly visible control station without requiring a large mounting area.
🎛️ 2 Control Positions
Provides 2 dedicated openings for compatible 30 mm push button devices
🟥 Red Molded Faceplate
High-visibility molded-resin faceplate helps the control station stand out
🧰 30 mm Device Openings
Designed specifically for industrial push button and operator-station assembly
🛡️ IP65 Enclosure
Provides dust and water protection when installed with compatible components
⚠️ Confirm Operator and Cable-Entry Compatibility
This enclosure is designed around 30 mm operator openings. Before assembly, verify the dimensions of the push buttons or control devices, the mounting depth behind the faceplate, cable entry opening, and thread size of PG 13.5. Choose cable-entry hardware and wiring methods that match the installation environment. To maintain the listed IP 65 performance, all installed operators, cable-entry fittings, and cover seals must be properly rated and assembled.
🚨 Emergency Stop Station Visibility
The emergency-red faceplate is suited to machine shutdown and safety-control locations where the operator station must be recognized quickly. The molded color is designed to remain visible without a painted surface that can chip or peel during routine use.
Key Features & Benefits
- 2-position layout for 30 mm operator devices
- Red Molded Resin for high control-station visibility
- Black PBT Plastic housing
- Counter-rotating cover locks support secure closure and service access
- Molded entry provisions simplify cable routing and enclosure preparation
- Ingress protection: IP 65
- Overall dimensions: 135 mm L X 80 mm W X 70 mm H (5.31" x 3.15" x 2.76")
- Oil-resistant construction supports routine cleaning around industrial equipment
- Use this enclosure to build a two-device emergency stop station, such as an emergency stop operator paired with a reset or control device. Its compact format fits machine frames, production equipment, and other locations that need a dedicated, easy-to-identify shutdown control.
Technical Specifications
|
Dimensions
|
135 mm L X 80 mm W X 70 mm H (5.31" x 3.15" x 2.76")
|
|
Housing Color
|
Black
|
|
Base Material
|
PBT Plastic
|
|
Face Plate
|
Red Molded Resin
|
|
Push Button Entry
|
30 mm
|
|
Wire Entry
|
Molded Knockout
|
|
Entry Opening
|
22 mm
|
|
Maximum Size
|
PG 13.5
|
|
Positions
|
2
|
|
Ingress Protection
|
IP 65
|
📋 Push Button Enclosure Installation Overview
1. Confirm the Layout: Verify that the planned devices use 30 mm mounting openings and fit within the available enclosure depth.
2. Prepare the Cable Entry: Open or use the molded entry provision without damaging the enclosure body, then install the correctly sized cable-entry fitting.
3. Install the Operators: Mount the push buttons or compatible operators in the faceplate and tighten them according to the device manufacturer’s instructions.
4. Complete the Wiring: Route conductors neatly, maintain adequate clearance, and keep wiring away from the cover-locking areas.
5. Close and Inspect: Reinstall the cover, engage the counter-rotating locks, and verify that the enclosure closes evenly before placing the station into service.
|
|
|
 |
|
 |
|
