Overview
The FF15A115NF53 is a 250mm 115V AC Black Type 3R Fan Filter Assembly. It delivers 114.7 CFM airflow with 31W power consumption to help protect enclosure electronics from heat buildup.114.7 CFM31WIP55 / Type 3R
This Type 3R model is built for outdoor cabinet cooling where the fan filter may be exposed to sunlight, moisture, and weather.
💨 Cabinet Cooling & Filtration
Filtered Airflow: Moves up to 114.7 CFM while helping keep dust and debris out of the enclosure.
Long Life: 40,000 hour life expectancy supports lower maintenance frequency.
Panel Protection: Helps reduce overheating that can cause equipment faults, shutdowns, or component damage.
Storage Temp: Rated for 14 to 131°F / -10 to 55°C environments.
Key Features
- 114.7 CFM airflow – helps remove heat from control cabinets and electrical enclosures
- 31W power consumption – efficient cooling performance for the cabinet size
- 115V AC input – matches common industrial control cabinet power requirements
- 40,000 hour life expectancy – reduces fan replacement intervals
- 50/55 dB(a) noise level – suitable for equipment panels and facility areas
- IP55 / Type 3R protection – supports dependable enclosure cooling in demanding conditions
- Tool-less mounting – Mounting without screws in square openings as indicated in the cut-out diagram - plate thickness between 1.3 and 3.7 mm.
- PBT glass fiber reinforced, PA 66 IGF13 HSL glass fiber reinforced elastic clips
- Filter media in thermo-linked progressive structure synthetic fiber
- Black (RAL 9005) finish – matches enclosure and panel design requirements
- UV & weather resistant
- Made for use in outdoor applications
✅ Why Choose This Fan Filter?
This Fandis FF series assembly combines fan cooling and air filtration in one cabinet-mounted unit. It is a practical upgrade when enclosure heat, dust, or frequent filter maintenance is affecting panel reliability.
Applications
The FF15A115NF53 is built for filtered ventilation in industrial enclosures, including:
- Control cabinets for industrial automation systems
- Outdoor or weather-exposed electrical enclosures
- Machine control panels and OEM equipment enclosures
- PLC, drive, relay, and power supply compartments
- Robotics cells, packaging equipment, and production machinery
- Electrical panels where filtered airflow helps protect components
Installation Notes
- Turn off power before cutting, wiring, or servicing the enclosure
- Confirm the cutout and panel thickness match the fan filter mounting requirements
- Mount the fan filter into the square opening using the integrated clips or approved screws when required
- Connect power according to the rated voltage and wiring diagram
- Check airflow and filter access before returning the panel to service
⚠️ Important Installation Info
Verify voltage: Match the fan voltage to the control panel supply before energizing.
Use correct cutout: Improper openings can reduce sealing, airflow, and enclosure protection.
Outdoor Use: Confirm enclosure, cutout, and installation method are suitable for Type 3R applications.
Performance Benefits
- Moves heat away from sensitive electrical and automation components
- Filters incoming air to reduce dust buildup inside the cabinet
- Supports faster filter changes from outside the enclosure
- Helps reduce downtime caused by overheated electronics
🧰 Maintenance Tip
Inspect filter media regularly in dusty environments. Replacing clogged filter media helps maintain airflow and lowers thermal stress on cabinet components.
