 |
 |
 |
|
Fandis FF20GA115NE31 325 mm 115V AC RAL 9005 Black Type 3R Fan Filter Assembly
Fandis FF20GA115NE31 325 mm, 115V AC, RAL 9005 Black, Fan Filter Assembly, with 434.1 CFM airflow, IP55 protection for filtered control cabinet ventilation and equipment protection.
Why Choose the FF20GA115NE31 Fan Filter Assembly?
The Fandis FF20GA115NE31 is a 325 mm 115V AC RAL 9005 black fan filter assembly designed for filtered ventilation in industrial control cabinets, automation equipment, and electronic enclosures. It moves air at 434.1 CFM and helps maintain safer internal cabinet temperatures during equipment operation.
The fan filter assembly draws ambient air through filter media to help reduce heat buildup, protect electrical components from dust, and support reliable operation in enclosure cooling applications. Its snap-in mounting design and removable cover simplify installation and filter maintenance from outside the cabinet. The Type 3R construction, UV-resistant materials, and weather-resistant design make it suitable for outdoor cabinet installations exposed to moisture and sunlight.
🌬️ Airflow Rating
Moves air at 434.1 CFM for control cabinet ventilation
🔧 Snap-In Mounting
Designed for tool-free installation in square openings with 1.3 and 3.7 mm panel thickness
🛡️ Protection Rating
IP55 (Protection from dust and low pressure water jets from any direction) for cabinet airflow protection
☀️ Outdoor Ready
Type 3R design with UV and weather-resistant materials for outdoor use
⚠️ Confirm Cutout, Panel Thickness, and Power Requirements
Before ordering, confirm the cabinet cutout size, enclosure depth, panel thickness, voltage, airflow direction, and protection rating required for the installation. This model is intended for panel thickness 1.3 and 3.7 mm. Confirm the 115V AC power requirement before connecting the fan.
Air should be routed from outside the cabinet into the enclosure through the filter media unless the installation instructions specify otherwise.
📋 Cabinet Cooling and Filtration Notes
Filter media in thermo-linked progressive structure synthetic fiber
Rated IP55 (Protection from dust and low pressure water jets from any direction). Regular filter inspection helps maintain airflow and supports reliable operation in electrical cabinets, control panels, and automation enclosures.
Key Features & Benefits
- Mounting without screws in square openings
- Can be attached with screws for thicker cabinets; screws are not supplied
- PBT glass fiber reinforced housing
- Color RAL 9005 Black
- Filter media in thermo-linked progressive structure synthetic fiber
- Extended lifespan reduces the need for replacement
Technical Specifications
|
Product Code
|
FF20GA115NE31
|
|
Brand
|
Fandis
|
|
Series
|
FF Series
|
|
Product Type
|
Fan Filter Assembly
|
|
Nominal Size
|
325 mm
|
|
Voltage
|
115V AC
|
|
Color / Finish
|
RAL 9005 Black
|
|
Airflow
|
434.1 CFM
|
|
Power Consumption
|
110W-156W
|
|
Protection Rating
|
IP55 (Protection from dust and low pressure water jets from any direction)
|
|
UL / NEMA Type
|
Type 3R according to UL 508
|
|
Panel Thickness
|
1.3 and 3.7 mm
|
|
Housing / Plastic Material
|
PBT glass fiber reinforced housing
|
|
Filter Media
|
Filter media in thermo-linked progressive structure synthetic fiber
|
|
Approvals / Standards
|
UL E237844, CE approved
|
📋 Basic Installation Overview
1. Prepare the Opening: Mount the unit in the correct square enclosure opening for panel thickness 1.3 and 3.7 mm.
2. Seat the Assembly: Press the assembly into the cutout so the clips engage securely. Use screws only where the installation instructions call for them.
3. Check Airflow: Confirm airflow direction, filter placement, and clearance around the fan or filter cover before operation.
4. Service the Filter: Inspect the filter media regularly and clean or replace it when dust buildup begins to restrict airflow.
Always follow the manufacturer installation documentation and electrical safety practices before wiring or servicing cabinet cooling equipment.
📦 Typical Applications
• Industrial control cabinets
• Automation equipment enclosures
• Electrical panels
• PLC and drive cabinets
• Electronics cooling and filtration
• Outdoor control panels exposed to sunlight or moisture
|
|
|
 |
|
 |
|
