 |
Seifert 4714322201 Fan Filter Assembly, 147mm, 24V DC, 35 CFM, IP54
Gray Seifert fan filter assembly for cooling and filtering control cabinets, automation equipment, and electronics. Rated for 35 CFM unimpeded airflow, 24V DC power, 5W consumption, and IP54 protection.
Why Choose the Seifert 4714322201 Fan Filter Assembly?
The Seifert 4714322201 is a 147mm gray fan filter assembly built to help cool electrical enclosures while filtering incoming air. It moves air at up to 35 CFM and uses thermally bonded, non-woven synthetic filter media to help reduce dust and contaminants inside control cabinets.
With 24V DC operation, low 5W power consumption, and a 44.5 dB(A) noise level, this fan filter assembly is a compact cooling option for automation panels, electronics housings, and control cabinets where heat buildup can shorten component life or cause equipment failure.
🌬️ 35 CFM Airflow
Provides standard airflow for cooling compact control cabinets and electronics
⚡ 24V DC Power
Runs on 24V 50/60 Hz with low 5W power consumption
🛡️ IP54 Protection
Helps protect against dust and splashing water from any direction
🔧 Fast Mounting
Snap-in mounting for thin panels or screw mounting for thicker panels
📋 Installation Notes
Mounting Position: Install in the lower third of the enclosure for intake airflow.
Thin Panels: For panel thickness less than 3.2mm / 0.13", push the assembly into the cutout until it clips into place.
Thicker Panels: For panel thickness greater than 3.2mm, secure the assembly with four M3 screws, not included.
Protection: IP54 standard protection helps guard against dust and splashing water.
Key Features & Benefits
- 147mm frame size for compact cabinet cooling
- Designed for control cabinets, automation equipment, and electronics
- Thermo-bonded, non-woven, break resistant synthetic fiber filter material
- RAL 7035 gray color
- Rated IP54 for dust and splash protection
- CE, UKCA, cURus, and cULus approved
- Replaces Seifert 4210D2000
📦 Typical Applications
• Electrical control cabinets
• Industrial automation enclosures
• Electronics housings
• Panel cooling systems
• Intake ventilation openings
• Replacement fan filter installations
📄 Seifert 4714322201 Fan Filter Assembly Downloads
Review the installation manual before mounting the fan filter assembly, especially when choosing between snap-in installation and screw mounting.
Technical Specifications
|
Manufacturer
|
Seifert
|
|
Part Number
|
4714322201
|
|
Product Type
|
Fan Filter Assembly
|
|
Frame Size
|
147mm
|
|
Color
|
Gray RAL 7035
|
|
Protection
|
IP54
|
|
Overall Dimensions
|
5.81" Height x 5.81" Width x 3.25" Depth
|
|
Cut Out Dimensions
|
4.88" x 4.88"
|
|
Air Flow Unimpeded
|
35 CFM
|
|
Air Flow With Exhaust Filter
|
25 CFM
|
|
Voltage
|
24V 50/60 Hz
|
|
Rated Current
|
0.21 Amps
|
|
Power Consumption
|
5 Watts
|
|
Noise Level
|
44.5 dB(A)
|
|
Fuse Rating
|
1 A (T)
|
|
Connection
|
Spring Clamp
|
|
Filter Media
|
Thermo-Bonded Non-Woven Synthetic Fiber
|
|
Operating Temperature
|
14°F to 140°F
|
|
Storage Temperature
|
-40°F to 158°F / -40°C to 70°C
|
|
Recommended Mounting Area
|
Lower Third of Enclosure
|
|
Snap-In Panel Thickness
|
Less Than 3.2mm / 0.13"
|
|
Screw Mount Panel Thickness
|
Greater Than 3.2mm
|
|
Screw Requirement
|
Use Four M3 Screws, Not Included
|
|
Approvals
|
CE, UKCA, cURus, cULus
|
|
Replacement For
|
Seifert 4210D2000 |
|
|
|
