 |
 |
 |
|
The Red Lion Sixnet
® Series SLX-5EG-1 is a 5 port unmanaged Gigabit capable Ethernet Power over Ethernet (PoE) Switch. Housed in an aluminum DIN rail enclosure, this SlimLine Plus SLX series switch features five 10/100/1000BaseTX RJ45 ports, with four of them being able to support PoE. It is designed to work at an efficient speed for real-time operation, as well as to stand up to the demands of industrial networks. The plug and play capability ensures that the switch is ready to go immediately, without requiring a user set-up or configuration. This switch works well in applications such as video & security, transportation, oil & gas, maritime, and mining. Comes with a 5 year warranty on defects in manufacturing or design.
PRODUCT FEATURES
- Compact housing
- Unmanaged plug and play operation
- Full IEEE 802.3 Compliance
- 5 Ports: Five RJ45 ports, Four support IEEE 802.3af (PoE)
- Extended Environmental Specifications
- -40 C to 85 C Operating temperature
- >1M+ Hours MTBF
- Supports Full/Half Duplex Operation
- LED link/activity status indication
- Auto senses speed and flow
- MDIX auto sensing cable
- Redundant Power Inputs (10-30VDC non PoE, 45-56VDC PoE)
- Power inputs with surge protection
- Rugged Metal DIN-Rail Enclosure
- Hazardous Locations (Class I, Division 2 and Zone 2) rated
Red Lion Sixnet SLX-5EG Downloads
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
Ethernet Performance
Unmanaged, Store & Forward Wire Speed Switching, Non-blocking
Full/Half Duplex Operation with flow control
MAC Addresses supported: 1024
Memory Bandwidth: 32 Gbps
Typical Latency for 10Mbps Ports: 16 us + frame time
Typical Latency for 100Mbps Ports: 5 us + frame time
Typical Latency for 1000Mbps Ports: 3 us + frame time
Jumbo frames: Up to 10K
Ethernet Isolation: 1500 VRMS 1 min
RJ45 Copper Ports
RJ45 Ports: 10/100/1000BaseTX
RJ45 MDI/MDIX Auto-crossover
RJ45 TD & RD auto-polarity
Auto detects speed & duplex settings
Environmental
Operating Temperature: -40 C to 85 C (cold startup -40 C)
Storage Temperature: -40 C to 85 C
Humidity (Non-Condensing): 5 to 95% RH
Vibration & Shock: IEC60068-2-6, -27
Power Input
Power consumption (no PoE): 4.3 W
Power consumption (with PoE): Up to 15.4 W per port
Power consumption max: 66 W with 4 fully loaded PoE ports
Transient Protection: 15,000 watts peak
Spike Protection: 5000 watts (10 times for 10 uS)
PoE Output (Ports 1-4)
Classification: PSE (power sourcing equipment)
PoE voltage: 45-48VDC depending on power input
PoE RJ45 pin assignments: TX/V- (3, 6) RX/V+ (1, 2)
PoE operation: Automatic detection and power management
Disconnect mode: AC Disconnect
Protection: Over temp, over current, over/under voltage, transient
Standards & Compliance
IEEE 802.3u, IEEE 802.3, IEEE 802.3x
Electrical Safety: UL 508/CSA C22.2/14, EN61010-1, CE
EMC: FCC Part 15, ICES-003, EN61000-6-4, EN61000-6-2, CE
Hazardous Locations: UL 1604/CSA C22.2/213 (Class I, Div 2),
EN60079-15 (Zone 2, Category 3), CE (ATEX)
Maritime/Marine/Offshore
NEMA TS-2 for traffic control systems
RoHS and WEEE Compliant
Physical
DIN-Rail or panel mount
Dimensions: 5.26" H x 1.76" W x 4.22" L
Case: Corrosion-resistant aluminum, rated IP 40
|
|
|
|
|
|
|
