 |
Sealcon CD07AR-SS 303 Stainless Steel 1/4" NPT / PG 7 Cord Grip
A 303 stainless steel cord grip for 0.08" to 0.20" cable. It is built for liquid-tight cable entries where corrosion resistance is a primary concern.
Why Choose the Sealcon CD07AR-SS Cord Grip?
The Sealcon CD07AR-SS, also known as Hummel 1.695.0700.15, is a high-quality 303 stainless steel strain relief cord grip. It is sold individually and accommodates 0.08"–0.20" (2–5 mm) cable.
Its stainless steel body is particularly useful in harsh, corrosion-sensitive environments. These include marine and offshore installations as well as chemical and food-processing facilities. A Buna-N seal and nylon clamping insert support a secure cable fit while the stainless steel body withstands demanding environmental conditions.
🔩 1/4" NPT / PG 7 Thread
Confirm the equipment entry matches this thread size and type
📏 0.08"–0.20" (2–5 mm) Cable Range
Match the cable outside diameter to the specified clamping range
🛡️ Rugged Material System
303 stainless steel body with Buna-N seal and nylon clamping insert
💧 Liquid-Tight Protection
NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
⚠️ Special-Order Product
This is a special-order item, so allow for a longer lead time. The locking nut is sold separately and must be selected to match the installation.
📋 Designed for Corrosive Environments
The 303 stainless steel body is intended for applications where corrosion is a main concern. It combines rugged construction with NEMA 4X and 6 protection, an IP68/IP69K rating, and a 150 psig pressure rating.
Key Features & Benefits
- 303 Stainless Steel body with Buna-N seal and nylon Clamping Insert
- Submersible to 300 ft.; NEMA 4X and 6 (IP68/IP69K)
- 150 psig (10 bar) pressure rating
- Flame protection to UL 94
- Halogen- and phosphorus-free
- Resists salt water, acids, alkalis, gasoline, and oils
- Durable, rugged construction
- RoHS and Deca-BDE, CSA approval
- Sold individually
Technical Specifications
|
Product Code
|
CD07AR-SS
|
|
Hummel Part Number
|
1.695.0700.15
|
|
Product Type
|
303 stainless steel strain relief cord grip
|
|
Body / Seal Material
|
303 stainless steel body with Buna-N seal and nylon clamping insert
|
|
Thread Size
|
1/4" NPT / PG 7
|
|
Cable O.D. Range
|
0.08"–0.20" (2–5 mm)
|
|
Through-Hole Diameter
|
0.49" (12.5 mm)
|
|
Body Length
|
0.75" (19 mm)
|
|
Thread Length
|
0.2" (5 mm)
|
|
Dome Wrench Flat
|
0.55" (14 mm)
|
|
Body Wrench Flat
|
0.55" (14 mm)
|
📋 Selection Checklist
1. Match the Thread: Confirm the equipment opening accepts 1/4" NPT / PG 7.
2. Measure the Cable: Verify that the cable outside diameter falls within 0.08"–0.20" (2–5 mm).
3. Confirm the Material: Make sure 303 stainless steel body with buna-n seal and nylon clamping insert is appropriate for the application.
4. Check the Protection Level: The fitting is rated NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
5. Verify the Pressure Rating: The stated pressure rating is 150 psig (10 bar).
📦 What's Included
• One Sealcon CD07AR-SS cord grip
• Buna-N seal and nylon clamping insert
✅ Approvals & Compliance
• RoHS compliance
• Deca-BDE (decabromodiphenyl ether) compliance
• REACH compliance
• WEEE Directive compliance
• UL/cUL Listed
• UL Registered
• EAC
• CE
• German Lloyd
🏷️ Product Identification
Sealcon Product Code: CD07AR-SS
Hummel Part Number: 1.695.0700.15
Product Names: Cord grip, strain relief fitting, or cable gland
Sales Unit: Sold individually
|
|
|
