 |
Sealcon CD07AA-SV, Stainless Steel, Cord Grip, PG 7, Cable OD .12" - .26" (3 - 6.5 mm)
CD07AA-SV cord grip / cable gland with 303 Stainless Steel Material with Viton Seal & PVDF clamping insert, PG 7 thread, .12" - .26" (3 - 6.5 mm) cable OD range, NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating.
Why Choose the Sealcon CD07AA-SV Cable Gland?
The Sealcon CD07AA-SV, also known as Hummel 1.696.0700.01, is a Stainless Steel cord grip / cable gland designed to secure cable entry points in demanding equipment and enclosure applications. It uses a PG 7 thread, fits cable O.D. .12" - .26" (3 - 6.5 mm) and has a .49" (12.5 mm) through-hole diameter. Environmental sealing is listed as Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating.
Use this fitting for off-shore rigs, marine applications, chemical plants, food processing and other areas that are under harsh conditions. Its design supports resistance to salt water, acids, alkalis, gasoline, and oils, Flame Protected to UL 94 and Halogen and Phosphorous Free.
🔩 Threaded Cable Entry
PG 7 thread with .49" (12.5 mm) through-hole diameter
🛡️ Environmental Seal
NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating
⚙️ Material Construction
303 Stainless Steel Material with Viton Seal & PVDF clamping insert
🔧 Cable Protection
Overlapping splines help apply even strain relief around the cable
⚠️ Confirm Cable Fit and Accessories
Locking nut sold separately; Special order item; allow for a longer lead time. Confirm the cable outside diameter is within the .12" - .26" (3 - 6.5 mm) range before ordering.
📋 Application and Rating Details
The Sealcon CD07AA-SV is built for cable strain relief, sealing, and panel entry applications where thread fit, cable diameter, material, and environmental rating must match the installation.
Rating: Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating
Chemical Resistance: Resists salt water, acids, alkalis', gasoline & oils.
Key Features & Benefits
- PG 7 thread size
- Cable O.D. range: .12" - .26" (3 - 6.5 mm)
- Through-hole diameter: .49" (12.5 mm)
- 303 Stainless Steel Material with Viton Seal & PVDF clamping insert
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
Technical Specifications
|
Product Code
|
CD07AA-SV
|
|
Vendor Part Number
|
CD07AA-SV
|
|
Hummel Number
|
1.696.0700.01
|
|
Brand
|
Sealcon / Hummel
|
|
Product Type
|
Cord Grip / Cable Gland
|
|
Material / Seal
|
303 Stainless Steel Material with Viton Seal & PVDF clamping insert
|
|
Color / Finish
|
Stainless Steel
|
|
Thread Size
|
PG 7
|
|
Cable O.D. Range
|
.12" - .26" (3 - 6.5 mm)
|
|
Through Hole Diameter
|
.49" (12.5 mm)
|
|
Body Length
|
.75" (19 mm)
|
|
Thread Length
|
.2" (5 mm)
|
|
Wrench Flat Dome
|
.55" (14 mm)
|
|
Wrench Flat Body
|
.55" (14 mm)
|
|
Environmental Rating
|
Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
|
|
Pressure Rating
|
150 psig (10 bar) Pressure Rating
|
|
Flame Rating
|
Flame Protected to UL 94
|
|
Compliance / Approvals
|
RoHS Compliance, Deca Bde Deca-Bromo-Diphenyl-Ether Compliance, Registration, Evaluation, Authorization and Restriction of Chemicals, Waste Electrical and Electronic Equipment Directive, UL / CUL Listed, UL Registered, EAC, German Lloyd
|
|
Sold As
|
Each / Sold Individually
|
|
Accessories
|
Locking nut sold separately.
|
📋 Basic Installation Overview
1. Confirm Thread: Verify the enclosure or panel opening matches the PG 7 thread and .49" (12.5 mm) through-hole requirement.
2. Match Cable Size: Use cable within the .12" - .26" (3 - 6.5 mm) outside diameter range.
3. Seat the Seal: Tighten the dome so the clamping insert applies even pressure around the cable without damaging the jacket.
4. Maintain Rating: Use the correct accessory hardware and install to the application requirements to support the listed IP/NEMA rating.
5. Final Check: Inspect the cable entry for pull-out resistance, seal compression, and proper panel fit before operation.
Always verify the Sealcon CD07AA-SV dimensions, cable O.D. range, and accessory requirements before installation.
📞 Sealcon / Hummel Product Support
Sealcon Cable Gland Support:
For help matching the CD07AA-SV to a cable diameter, thread size, enclosure material, IP/NEMA rating, or replacement cross reference, contact us before ordering.
Sealcon / Hummel cord grips are used for industrial cable entry, strain relief, and liquid-tight sealing in panels, machinery, and harsh-duty equipment.
|
|
|
