 |
Sealcon CF22DA-BR high quality nickel plated brass cord grip is liquid tight to 150 psi. Elongated M20 x 1.5 Metric Thread, Accommodates .39" - .55" (10 - 14 mm) O.D cable. Sold Individually. (Locking nut sold separately) Also known as Hummel # 1.623.2016.30
|
Thread Size/Type
|
M20 x 1.5
|
- Nickel Plated Brass Material with Stainless Steel Spring, Buna-N Seal & Nylon 6/6 Splined Bushing
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE approval
|
|
Through Hole Dia.
|
.79" (20 mm)
|
|
Body Length
|
3.86" (98 mm)
|
|
Thread Length
|
.39" (10 mm)
|
|
Wrench Flat Dome/Body
|
.94" (24 mm)
|
Sealcon M20 x 1.5 Metric Nickel Plated Brass strain relief fittings are used in nearly any industry to help customers connect cable or wire to their applications. Also known as a cord grip or cable gland, it carries a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. The CF22DA-BR lets you increase or decrease the cable opening by changing out the inserts. The self locking ACME thread on the flex top makes sure that the overlapping splines provide a concentric seal. This prevents the form seal from being pulled out of the fitting. It also provides pull-out protection for your cable without causing damage. Cable kinking or chafing is eliminated by using the flex nut. Elongated threads are used when the cable gland goes through a thick wall, or simply if a longer thread length serves the application more efficiently.
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of
Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- VDE
Sealcon Elongated Thread Brass Cable Gland CF22DA-BR
|
|
|
