You are here: Home > Liquid Tight Cable Glands > Nickel Plated Brass Dome Fittings > PG Nickel Plated Brass Dome Fittings > PG Elongated Brass Dome Fittings
Dome Fittings
Part Numbers Cable Range Thread Range
Elongated Thread Inches (mm)
CD07CA-BR .12" - .26" (3 - 6.5 mm) PG 7 / 1/4" NPT
CD07CR-BR .08" - .20" (2 - 5 mm) PG 7 / 1/4" NPT
CD09CA-BR .16" - .31" (4 - 8 mm) PG 9
CD09CR-BR .08" - .24" (2 - 6 mm) PG 9
CD11CA-BR .20" - .39" (5 - 10 mm) PG 11
CD11CR-BR .12" - .28" (3 - 7 mm) PG 11
CD13CA-BR .24" - .47" (6 - 12 mm) PG 13 / 13.5
CD13CR-BR .20" - .35" (5 - 9 mm) PG 13 / 13.5
CD16CA-BR .39" - .55" (10 - 14 mm) PG 16
CD16CR-BR .28" - .47" (7 - 12 mm) PG 16
CD21CA-BR .51" - .71" (13 - 18 mm) PG 21
CD21CR-BR .35" - .63" (9 - 16 mm) PG 21
CD29CA-BR .71" - .98" (18 - 25 mm) PG 29
CD29CR-BR .51" - .79" (13 - 20 mm) PG 29
CD36CA-BR .87" - 1.26" (22 - 32 mm) PG 36
CD36CR-BR .79" - 1.02" (20 - 26 mm) PG 36
CD42CA-BR 1.26" - 1.50" (32 - 38 mm) PG 42
CD42CR-BR .98" - 1.22" (25 - 31 mm) PG 42
CD48CA-BR 1.46" - 1.73" (37 - 44 mm) PG 48
CD48CR-BR 1.14" - 1.38" (29 - 35 mm) PG 48
Sort By:
Page of 2
   
 

PG Brass Cord Grips with Elongated Thread

Sealcon nickel plated brass cable glands with PG elongated thread is available in PG 7 to PG 48 sizes. The longer thread length is intended for applications in which the cord grip has to go through a thicker wall or panel. Like other Sealcon cord grips, they have overlapping splines that create an even seal, which keeps the form seal from being pulled out of the fitting. They have either reduced or standard inserts, which are interchangeable to accept a bigger range of cable diameters.