 |
Sealcon CD07CA-RV Nickel-Plated Brass Elongated PG 7 Cord Grip with PVDF/Viton Inserts
A PG 7 nickel-plated brass cord grip with PVDF and Viton components. Its elongated thread and -31°F to 302°F range suit thick-wall, chemical, and extreme-temperature applications.
Why Choose the Sealcon CD07CA-RV Cord Grip?
The Sealcon CD07CA-RV, also known as Hummel 1.699.0700.60, is a high-quality nickel-plated brass PG 7 cord grip with elongated thread and PVDF/Viton inserts. It is sold individually and accommodates 0.12"–0.26" (3–6.5 mm) cable.
The PVDF clamping insert and Viton sealing components help the fitting resist chemical exposure and extreme temperatures. Its elongated thread also supports thicker mounting walls. Standard and reduced inserts can be exchanged to adjust the cable opening. A self-locking ACME dome thread keeps the overlapping splines engaged for concentric sealing and pull-out protection.
🔩 PG 7 Thread
Confirm the equipment entry matches this thread size and type
📏 0.12"–0.26" (3–6.5 mm) Cable Range
Match the cable outside diameter to the specified clamping range
🛡️ Rugged Material System
Nickel-plated brass body with Viton insert, PVDF clamping insert, and Viton seal
💧 Liquid-Tight Protection
NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
⚠️ Order the Locking Nut Separately
The locking nut is sold separately. Verify the PG 7 thread, 0.39" thread length, and 0.12" to 0.26" cable range before ordering.
📋 Modular Insert System
The cable opening can be increased or decreased by exchanging the standard and reduced inserts. The PVDF and Viton components support chemical and temperature resistance from -35°C to 150°C (-31°F to 302°F).
Key Features & Benefits
- Nickel Plated Brass body with Viton insert, PVDF Clamping Insert, and Viton seal
- Operating temperature: -35°C to 150°C (-31°F to 302°F)
- Submersible to 300 ft.; NEMA 4X and 6 (IP68/IP69K)
- 150 psig (10 bar) pressure rating
- Flame protection to UL 94
- Halogen- and phosphorus-free
- Vibration-resistant dome
- Resists salt water, acids, alkalis, gasoline, and oils
- Durable, rugged construction
- RoHS and Deca-BDE, CSA approval
- Performs in extreme temperatures and resists chemical exposure
- Sold individually
Technical Specifications
|
Product Code
|
CD07CA-RV
|
|
Hummel Part Number
|
1.699.0700.60
|
|
Product Type
|
Nickel-plated brass PG 7 cord grip with elongated thread and PVDF/Viton inserts
|
|
Body / Seal Material
|
Nickel-plated brass body with Viton insert, PVDF clamping insert, and Viton seal
|
|
Thread Size
|
PG 7
|
|
Cable O.D. Range
|
0.12"–0.26" (3–6.5 mm)
|
|
Through-Hole Diameter
|
0.49" (12.5 mm)
|
|
Body Length
|
0.75" (19 mm)
|
|
Thread Length
|
0.39" (10 mm)
|
|
Dome Wrench Flat
|
0.55" (14 mm)
|
|
Body Wrench Flat
|
0.55" (14 mm)
|
📋 Selection Checklist
1. Match the Thread: Confirm the equipment opening accepts PG 7.
2. Measure the Cable: Verify that the cable outside diameter falls within 0.12"–0.26" (3–6.5 mm).
3. Confirm the Material: Make sure nickel-plated brass body with viton insert, pvdf clamping insert, and viton seal is appropriate for the application.
4. Check the Protection Level: The fitting is rated NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
5. Verify the Pressure Rating: The stated pressure rating is 150 psig (10 bar).
📦 What's Included
• One Sealcon CD07CA-RV cord grip
• Viton insert, PVDF clamping insert, and Viton seal
✅ Approvals & Compliance
• RoHS compliance
• Deca-BDE (decabromodiphenyl ether) compliance
• REACH compliance
• WEEE Directive compliance
• UL/cUL Listed
• UL Registered
• CSA
• EAC
• CE
• German Lloyd
🏷️ Product Identification
Sealcon Product Code: CD07CA-RV
Hummel Part Number: 1.699.0700.60
Product Names: Cord grip, strain relief fitting, or cable gland
Sales Unit: Sold individually
|
|
|
