Home > Relays > Phase Monitor Relays >

Macromatic PBDU Slim DIN-Rail Mount Phase Monitor Relay


Macromatic PBDU Slim Phase Monitor Relay
Macromatic PBDU Slim DIN-Rail Mount Phase Monitor Relay
 
Alternative Views:


Price: $65.43
Note: Delivery: 2-5 Business Days
MFG P/N: PBDU
MFG: Macromatic
Weight (lbs): 0.5

Quantity in Stock :2


Availability:
In Stock
Product Code: PBDU
Qty:

Description
 

The Macromatic PBDU is a multi-detection phase monitor relay. This slim housing DIN-Rail mount relay has a monitored voltage range of 208-480V AC. It monitors against 3 different types of phase errors and has an output of 5A SPDT. It has two LED indicators. The green LED shows the power to the relay is on and the yellow LED shows the current status. The slim housing saves space on the DIN-Rail. Note: Image is an approximation. Actual part may differ.

Monitors For:

  • Phase Loss
  • Phase Reversal
  • Phase Unbalance (can be disabled if needed)

Specifications

  • Relay Function- Multi-Detection 3 Phase Monitor
  • Monitored Voltage- 208-480V AC
  • Output- 5A SPDT
  • Min. Voltage- 187V AC
  • Max. Voltage- 528V AC
  • Power Consumption- 10VA (1 watt) @ 400 / 50Hz, 16VA (1.5 watt) @ 480V / 60 Hz
  • Phase Loss- Trips on Phase L1, L2, or L3 loss
  • Phase Reversal- Trips if rotation is something other than L1-L2-L3
  • Phase Unbalance- Adjustable from 5-25% unbalance
    Trips when one of the 3 lines diverges from the average of all 3 by more than the adjusted set point for longer than the trip delay
  • Trip Delay- 100 milliseconds
  • Accuracy- < / = 5%, Repeat Accuracy: + / - 2%, Temperature Influence: < / = 0.05% (Celsius)
  • Operating Temperature- -25 C to 55 C (-13 F to 131 F)
  • Storage Temperature- -25 C to 75 C (-13 F to 167 F)
  • Output Contacts- SPDT 5A @ 250V AC
  • Life- Mechanical: 20,000,000 Operations
    Electrical: 200,000 Operations at 1000VA resistive load
  • Humidity- -15 to 85%
  • Termination- 1 x #14-20 AWG, 2 x #16-20 AWG
  • Dimensions- 3.4" Height x 0.7" Width x 2.6" Depth
  • IP Rating- IP 20 (protected from outside particles 12.5 mm (0.5") in diameter or greater)
  • Approvals- UL & CUL Listed, CE

The PBDU de-energizes and the yellow LED turns off when any of the phase errors are detected, after a 100 millisecond trip delay. It will energize again automatically once the error is corrected, and the yellow LED indicator will come back on. Trip delay is fixed.

Macromatic PBDU Relay Installation Manual

Macromatic Three Phase Monitor Relay Comparison Chart

Slim DIN Rail Mount Three Phase Monitor Relay

Additional Product Information



Menics MS70S-G20-G 70mm Xenon Strobe Beacon Light, 220V, Green, Surface Mount $69.34
Cnlinko DH-24-C04PE-03-001 DH-24 Series 4 Pin Male Cable Plug $21.68
Kacon T19-271GA2 19 mm Green Momentary Push Button, 1NO/1NC, 110/220V AC LED $27.46
GardTec SC120-W6 120mm Wire Form Fan Guard, 7 Ring, Flat $1.30
Sealcon DM-40-GY M40 Gray Nylon Dome Plug $2.14
GardTec SC120-W4 120mm Wire Form Fan Guard $0.82
Kacon HR707N-2PLC-110VAC Electro Mechanical Relay, DPDT, 110V AC, Surge Protection, 10A, High Housing $15.47
ILME CAP-06L229 C-Type Surface Mount Housing, Size 44.27, Single Lever, PG 29, 2 Entries $40.99
HTP Form C Solenoid Valve Connector, 8 mm, 24V LED, MOV - NBR Profile $6.85