 |
Sealcon CD07AR-SV 303 Stainless Steel PG 7 Cord Grip with Viton Seal
A PG 7 stainless steel cord grip with a Viton seal and PVDF clamping insert. It fits 0.08" to 0.20" cable and is made for corrosion-sensitive installations.
Why Choose the Sealcon CD07AR-SV Cord Grip?
The Sealcon CD07AR-SV, also known as Hummel 1.696.0700.15, is a high-quality 303 stainless steel PG 7 strain relief cord grip. It is sold individually and accommodates 0.08"–0.20" (2–5 mm) cable.
The stainless steel body is well suited to harsh environments where corrosion could compromise a cable entry. It can serve marine, offshore, chemical-processing, and food-processing installations. The combination of a Viton seal and PVDF clamping insert supports durable cable sealing in demanding operating conditions.
🔩 PG 7 Thread
Confirm the equipment entry matches this thread size and type
📏 0.08"–0.20" (2–5 mm) Cable Range
Match the cable outside diameter to the specified clamping range
🛡️ Rugged Material System
303 stainless steel body with Viton seal and PVDF clamping insert
💧 Liquid-Tight Protection
NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
⚠️ Made-to-Order Product
This item is made to order, so allow for a longer lead time. The locking nut is sold separately and must be selected to match the PG 7 installation.
📋 Stainless Steel with Viton and PVDF Components
The 303 stainless steel body provides corrosion resistance, while the Viton seal and PVDF clamping insert support a secure, liquid-tight cable entry. The fitting is rated NEMA 4X and 6, IP68/IP69K, and 150 psig.
Key Features & Benefits
- 303 Stainless Steel body with Viton seal and PVDF Clamping Insert
- Submersible to 300 ft.; NEMA 4X and 6 (IP68/IP69K)
- 150 psig (10 bar) pressure rating
- Flame protection to UL 94
- Halogen- and phosphorus-free
- Resists salt water, acids, alkalis, gasoline, and oils
- Durable, rugged construction
- RoHS and Deca-BDE approval
- Sold individually
Technical Specifications
|
Product Code
|
CD07AR-SV
|
|
Hummel Part Number
|
1.696.0700.15
|
|
Product Type
|
303 stainless steel PG 7 strain relief cord grip
|
|
Body / Seal Material
|
303 stainless steel body with Viton seal and PVDF clamping insert
|
|
Thread Size
|
PG 7
|
|
Cable O.D. Range
|
0.08"–0.20" (2–5 mm)
|
|
Through-Hole Diameter
|
0.49" (12.5 mm)
|
|
Body Length
|
0.75" (19 mm)
|
|
Thread Length
|
0.2" (5 mm)
|
|
Dome Wrench Flat
|
0.55" (14 mm)
|
|
Body Wrench Flat
|
0.55" (14 mm)
|
📋 Selection Checklist
1. Match the Thread: Confirm the equipment opening accepts PG 7.
2. Measure the Cable: Verify that the cable outside diameter falls within 0.08"–0.20" (2–5 mm).
3. Confirm the Material: Make sure 303 stainless steel body with viton seal and pvdf clamping insert is appropriate for the application.
4. Check the Protection Level: The fitting is rated NEMA 4X and 6 (IP68/IP69K); submersible to 300 ft.
5. Verify the Pressure Rating: The stated pressure rating is 150 psig (10 bar).
📦 What's Included
• One Sealcon CD07AR-SV cord grip
• Viton seal and PVDF clamping insert
✅ Approvals & Compliance
• RoHS compliance
• Deca-BDE (decabromodiphenyl ether) compliance
• REACH compliance
• WEEE Directive compliance
• UL/cUL Listed
• UL Registered
• EAC
• German Lloyd
🏷️ Product Identification
Sealcon Product Code: CD07AR-SV
Hummel Part Number: 1.696.0700.15
Product Names: Cord grip, strain relief fitting, or cable gland
Sales Unit: Sold individually
|
|
|
