Home > Electrical Enclosures > Push Button Boxes > 4 Position Push Button Boxes >

Saginaw SCE-4PBA Sloped Front Push Button Enclosure, 4 Position, 30.5mm, 1x4

Saginaw Sloped Front Push Button Box, 4 Position, 30.5mm

Alternative Views:

Price: $127.24

Note: Ships in 5-7 business days, contact us to confirm current ship date
MFG P/N: SCE-4PBA
MFG: Saginaw Control & Engineering
Weight (lbs): 5

Availability: In Stock
Product Code: SCE-4PBA

Qty:

Description

Saginaw Control & Engineering SCE-4PBA is a 4 position sloped front push button enclosure. It is made from 0.063" carbon steel with an ANSI-61 gray powder coating and four 30.5mm pushbutton entrances in a 1x4 configuration. Ideal for keeping oil-tight push buttons, switches, and pilot lights protected from dirt & moisture where a slanted surface is needed.

3.5" H x 10" W x 4.87" D (89mm x 254mm x 123.7mm)
Continuously welded seams
Cover screws thread into sealed wells
Compatible with any brand of oil-tight push buttons, switches, or pilot lights
4 way standard push button entrance
Gasket is oil & water resistant
Comes with mounting feet
IS2 industry standards - NEMA Type 4, 12 and Type 13, UL Listed Type 4 and 12, CSA Type 4 and 12, IEC 60529, IP 66

Industrial Enclosure & Junction Box Selector

	Mencom MAC-4MPX-10M 1/2-20 Cordset, 4 Pole, Male Straight, 10 M, 18 AWG $75.98
	Sealcon M23 Right Angle Panel Mount Signal Connector, 7 Pole $19.73
	Light Efficient Design LED-8061E22 28W LED Filament Light, 2200K, 120/277V $23.40
	LiteCycle SG-AL-090705 Aluminum Junction Box, 70x93x52 $36.46
	Mencom DB09FSC 9-Pin Female D-Sub Insert, Solder Pin, for Panel Interface Connector $2.50
	Kacon K16-180-R-12V 16 mm Red Pilot Lamp, Square, 12V DC LED $7.26
	Remphos RP-B-LS-G2-CR-SPND Continuous Run Suspension Mounting Kit $9.36
	ILME CKX-03VG C-Type Insulating Hood, Size 21.21, PG 11, Single Lever $10.58
	Menics ATEPR-10-Y 56 mm 1 Stack Andon Tower Light w/ Push Button Control Box, Yellow, 110V, 10Ft Cable $131.40