 |
The Macromatic PAP480 is a three phase monitor relay that monitors for phase reversal, phase loss and undervoltage. This 8 pin plug in relay has a nominal voltage of 480V, with an output of 10A SPDT. The LED on top will be green if everything is functioning correctly. If the relay finds an error, the LED glows or blinks red. The diagram on top of the unit shows how the LED will indicate the current status. The PAP480 uses an 8 pin 70169-D octal socket.
Note: Image is an approximation. Actual part may differ.
Specifications
- Relay Function- Three Phase
- Nominal Voltage- 480V AC
- Minimum Voltage- 156 V
- Maximum Voltage- 550 V
- Power Consumption- < 40VA
- Output- 10A SPDT
- Phase Reversal- Trips if rotation is something other than A-B-C
- Phase Loss- Trips if Phase A, B or C is lost
- Undervoltage- Adjustable from 360-460V, Trips when the average of all 3 lines is less than the set point for longer than the trip delay
- Operating Temperature- -28 C to 65 C (-18 F to 149 F)
- Storage Temperature- -40 C to 85 C (-40 F to 185 F)
- Output Contacts- 10A @ 277V AC / 7A @ 30V DC, 1 HP @ 250V AC, 1/2HP @ 125V AC, C300 Pilot Duty
- Life- Mechanical: 10,000,000 Operations, Full Load: 100,000 Operations
- Response Time- Restart: 1 sec, Phase Loss/Reversal: 100ms, Undervoltage: 4 sec
- Dimensions- 2.4" Height x 1.7" Width x 3.5" Depth
- Approvals- UL and CUL Recognized, CE, C-UL-US Listed (with Socket)
The PAP480 utilizes "True RMS voltage measurement" as part of the PAP series. Analog to digital sensing circuitry in True RMS voltage measurement allows the relay to be more precise in monitoring phases and voltages. The PAP480 has a useful feature in that even if a phase is lost, it can still monitor all the voltages while indicating the fault. It is important that this relay be used with a 600V rated socket if the system voltage is above 300V. As long as the phases stay in the right order and do not go under the set undervoltage point, the unit remains energized. The undervoltage point can be set between 75-95% of the nominal voltage. The relay de-energizes if it picks up a phase error. Once the error is fixed, it will energize again on its own.
Macromatic PAP Series Relay Installation Manual
Macromatic PAP480 Phase Monitor Relay
|
|
|
