 |
Sealcon CD07CR-BK: Black Nylon Elongated-Thread Cable Gland, PG 7 / 1/4 in. NPT, 2–5 mm Cable
Black Nylon 6/6 liquid-tight cord grip with a 0.59 in. (15 mm) elongated entry thread for 0.08–0.20 in. (2–5 mm) cable. The vibration-resistant dome and concentric clamping design provide strain relief for thick-wall panels, industrial enclosures, machinery, and outdoor equipment.
✅ Longer Thread Reach for Thick Panels
Choose the CD07CR-BK when a PG 7 / 1/4 in. NPT cable entry needs a longer 0.59 in. (15 mm) thread. The black nylon body accepts cable from 0.08 to 0.20 in. (2 to 5 mm) in outside diameter and provides a liquid-tight seal when correctly installed with compatible components.
Secure Small-Diameter Cable in Demanding Enclosures
The Sealcon CD07CR-BK elongated-thread cable gland seals and supports small-diameter cable entering industrial cabinets, junction boxes, machines, and field equipment. Nylon 6/6 construction keeps the fitting lightweight and corrosion resistant, while the Buna-N seal protects the cable entry from moisture and contaminants.
Sealcon's overlapping clamping splines apply force evenly around the cable jacket. This design improves pull-out resistance, helps prevent localized jacket damage, and keeps the recessed grommet seated. The elongated thread provides additional reach through thick enclosure walls.
🔩 0.59 in. Thread
Elongated 15 mm entry thread provides added reach through thicker enclosure walls
💧 NEMA 4X/6 Seal
IP68/IP69K performance, submersible to 300 ft., with a 150 psig pressure rating
⚙️ Vibration Resistant
Self-locking dome and overlapping splines help maintain clamping force in moving equipment
⬛ Black Nylon 6/6
Durable, corrosion-resistant construction with a Buna-N sealing element
Key Features & Benefits
- Elongated Thread: 0.59 in. (15 mm) thread length supports thick-wall mounting
- Concentric Cable Grip: Overlapping splines apply even pressure for pull-out resistance and jacket protection
- Rugged Nylon Construction: Black Nylon 6/6 body with a Buna-N seal
- Environmental Protection: Rated NEMA 4X and 6, IP68 and IP69K, and submersible to 300 ft.
- Pressure Capability: Rated to 150 psig (10 bar)
- Chemical Resistance: Resists salt water, acids, alkalis, gasoline, and oils
- Flame and Material Compliance: UL 94 flame protected, halogen free, and phosphorus free
- Sold Individually: Locking nut and O-ring are sold separately
Specifications
|
Part Number
|
CD07CR-BK
|
|
Brand
|
Sealcon
|
|
Alternate Part Number
|
Hummel 1.209.0701.61
|
|
Product Type
|
Elongated-thread cable gland / cord grip
|
|
Color
|
Black
|
|
Thread Size
|
PG 7 / 1/4 in. NPT
|
|
Cable O.D. Range
|
0.08–0.20 in. (2–5 mm)
|
|
Through-Hole Diameter
|
0.49 in. (12.5 mm)
|
|
Body Length
|
0.83 in. (21 mm)
|
|
Thread Length
|
0.59 in. (15 mm)
|
|
Wrench Flat — Dome
|
0.59 in. (15 mm)
|
|
Wrench Flat — Body
|
0.59 in. (15 mm)
|
|
Body Material
|
Nylon 6/6
|
|
Seal
|
Buna-N
|
|
Environmental Ratings
|
NEMA 4X and 6; IP68 and IP69K; submersible to 300 ft.
|
|
Pressure Rating
|
150 psig (10 bar)
|
✅ Approvals & Compliance
- RoHS compliance
- Deca-BDE compliance
- REACH compliance
- WEEE compliance
- UL / cUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- UL 94 V-0 rated / approved
📏 Cable and Panel Selection
Confirm a cable outside diameter between 0.08 and 0.20 in. (2 and 5 mm), a PG 7 / 1/4 in. NPT entry, and the required thread reach. Standard and reduced inserts may be available separately for compatible cable ranges.
🔧 Installation Notes
Verify the entry: Confirm thread compatibility and available panel depth before installation.
Seat the cable: Pass the cable through the gland and tighten the dome until the grommet seals evenly around the jacket.
Add mounting hardware: Install a compatible locking nut and O-ring when required; both are sold separately.
🏭 Typical Applications
Industrial control cabinets
Machine wiring and junction boxes
Outdoor electrical enclosures
Automation equipment exposed to vibration or washdown
|
|
|
