You are here: Home > Liquid Tight Cable Glands > Nylon Plastic Dome Fittings > PG Nylon Dome Fittings > PG Elongated Nylon Dome Fittings
Dome Fittings
Part Numbers Cable Range Thread Range
Black Gray Inches (mm)
CD07CA-BK CD07CA-GY .12" - .26" (3 - 6.5 mm) PG 7 / 1/4" NPT
CD07CR-BK CD07CR-GY .08" - .20" (2 - 5 mm) PG 7 / 1/4" NPT
CD09CA-BK CD09CA-GY .16" - .31" (4 - 8 mm) PG 9
CD09CR-BK CD09CR-GY .08" - .24" (2 - 6 mm) PG 9
CD11CA-BK CD11CA-GY .20" - .39" (5 - 10 mm) PG 11
CD11CR-BK CD11CR-GY .12" - .28" (3 - 7 mm) PG 11
CD13CA-BK CD13CA-GY .24" - .47" (6 - 12 mm) PG 13 / 13.5
CD13CR-BK CD13CR-GY .20" - .35" (5 - 9 mm) PG 13 / 13.5
CD16CA-BK CD16CA-GY .39" - .55" (10 - 14 mm) PG 16
CD16CR-BK CD16CR-GY .28" - .47" (7 - 12 mm) PG 16
CD21CA-BK CD21CA-GY .51" - .71" (13 - 18 mm) PG 21
CD21CR-BK CD21CR-GY .35" - .63" (9 - 16 mm) PG 21
CD29CA-BK CD29CA-GY .71" - .98" (18 - 25 mm) PG 29
CD29CR-BK CD29CR-GY .51" - .79" (13 - 20 mm) PG 29
CD36CA-BK CD36CA-GY .87" - 1.26" (22 - 32 mm) PG 36
CD36CR-BK CD36CR-GY .79" - 1.02" (20 - 26 mm) PG 36
CD42CA-BK CD42CA-GY 1.26" - 1.50" (32 - 38 mm) PG 42
CD42CR-BK CD42CR-GY .98" - 1.22" (25 - 31 mm) PG 42
CD48CA-BK CD48CA-GY 1.46" - 1.73" (37 - 44 mm) PG 48
CD48CR-BK CD48CR-GY 1.14" - 1.38" (29 - 35 mm) PG 48
Sort By:
Page of 2
   
 

PG Nylon Cord Grips with Elongated Thread

Major Electronix carries the full line of Nylon Plastic PG Size Dome Cable Glands with elongated thread. They range in size from PG 7 to PG 48. The longer thread length is mostly used when the strain relief fitting needs to go through a thicker panel or wall. Aside from the thread length, the size remains the same as the standard version. These cord grips are available in gray or black, with standard or reduced inserts. Inserts can be switched out if needed to increase adaptability.