The Menics MT8B4DL-RYGB 4 stack tower light has a 85mm diameter and is rated for 12V. It has red, yellow, green, & blue lenses, with a steady light. The light is evenly distributed due to the prism cut lens. The signal light itself comes pre-assembled and pre-wired. It can be used around machines and in high vibration environments due to the vibration-absorbing rubber embedded inside. Uses incandescent bulbs (see below for optional LED bulbs). Rated IP 54. Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request. Image is for reference, actual part may differ.

Specifications

• Mounting- Pole Mount or Wall Mount (with pole) - see mounting accessories below
• Light Operation- Steady
• Power Supply- 12V AC/DC
• Current Draw- 3.3 Amps
• Lead Length- 25"
• Lens Colors- Red/Yellow/Green/Blue
• Lens Material- Polycarbonate Resin
• Number of Tiers- 4 Stack
• Dimensions (Tower Light Only)- 395 mm Height x 85mm Diameter (15.55" x 3.35")
• Vibration- 3 mm @10~55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Ambient Humidity- 45-85% Relative Humidity
• Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 54 (Protected from harmful dust deposits and splashing water from any direction)
• Approvals- RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

Menics MT8B4DL-RYGB 85mm 4 Tier 12V Tower Signal Light