|
Menics Tower and Beacon Signal Light Mounting Accessories Menics · Products for Automation
Menics Tower & Beacon Signal Light Mounting AccessoriesCompare mounting poles, bases, adapters and wall brackets for Menics tower lights and beacon signal lights. Find hardware by light series and installation method for machine panels, control cabinets and equipment frames. At a glance Start with the light series.
Find mounting accessories by light part numberEnter a Menics tower or beacon light part number, or choose its series. The lookup displays the series mounting options with product links and compatibility notes. Matches are based on the light series, not a validation of the complete ordering code. Confirm the light's mounting type before selecting hardware. For MS66 and MS70, the result separates the mounting types. Menics mounting accessory compatibility chartChoose your tower or beacon light series, then compare pole-and-base, pole-and-bracket, and direct wall mounting options. Each part number is linked to the product. Hardware grouped within an option provides choices; it does not mean every listed item is required. Before ordering: MAP-0022 cannot be used with PTE or PTM lights. MT8B/8C uses the MAM-B090C base. ASG and MS86 require the MAM-DS31 adapter for pole mounting.
"Pole mount only" and "direct wall mount only" indicate installation methods limited to only what is on the chart. Stud-mounted beacon light series use the direct wall brackets listed. Confirm the exact light model and accessory dimensions before ordering. Key mounting compatibility notes
How to select signal light mounting hardwarePlan the light's position before selecting accessories. A pole can elevate the signal above nearby equipment, while a wall bracket provides a mounting point on a vertical surface. Direct wall mounting keeps the light close to that surface. 1. Identify the seriesCheck the complete light model, including the MT subseries or mounting type where applicable.Find your series2. Choose the mounting methodCompare pole with base, pole with wall mount and direct wall mounting.Compare combinations3. Check special requirementsConfirm adapter needs, base requirements and series exclusions.Review compatibility4. Confirm the assemblyCheck mounting holes, pole dimensions, cable routing and clearance with the exact product.Ask for selection help
Selection help: Email [email protected] with your Menics light model, preferred mounting method and required pole length. Menics light mounting FAQsClick or tap to expandCan MAP-0022 be used with PTE or PTM tower lights?No. MAP-0022 cannot be used with either series. Choose MAP-0060, MAP-0240, MAP-0750 or MAP-1000 and match the pole to the appropriate base or bracket. Which adapter is required for ASG and MS86 pole mounting?ASG and MS86 beacon lights require the MAM-DS31 pole mount adapter. Include the adapter when planning the pole-mounted assembly. What is the difference between pole wall mounting and direct wall mounting?Pole wall mounting combines a mounting pole with a compatible wall bracket. Direct wall mounting attaches the light through the bracket specified for its series and mounting type, without a pole. Which mounting base is used for MT8B and MT8C tower lights?MT8B and MT8C use the MAM-B090C base for pole-with-base mounting. The standard and threaded pole-and-wall mounting options apply to all MT subseries in this guide. Do MS115 and MS135 need a separate pole mounting base?The SAM-T115 and SAM-T135 assembled pole mounts include an adapter and 25 mm diameter pole with base. For pole-and-wall mounting, use the corresponding SAM assembly with MAM-DS38. |