Menics MT8B3BL-RYG 3 Stack 85mm Tower Light, Red Yellow Green, 110V

The Menics MT8B3BL-RYG 3 stack tower light has a 85mm diameter and is rated for 110-120V. It has red, yellow, & green lenses, with a steady light. Lens is prism cut, which evenly distributes the light. The signal light itself comes pre-assembled and pre-wired. It can be used around machines and in high vibration environments due to the vibration-absorbing rubber embedded inside. Uses incandescent bulbs (see below for optional LED bulbs). Rated IP 54. Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request. Image is for reference, actual part may differ

Specifications

• Mounting- Pole Mount (with pole & base) or Wall Mount (with pole & bracket) - see mounting accessories below
• Light Operation- Steady
• Power Supply- 110-120V AC
• Current Draw- 0.24 Amps
• Lead Length- 25"
• Lens Colors- Red/Yellow/Green
• Lens Material- Polycarbonate Resin
• Number of Tiers- 3 Stack
• Dimensions (Tower Light Only)- 327 mm Height x 85 mm Diameter (12.87" x 3.35")
• Brightness- 6 Lumens, 480 mcd (Red), 10 Lumens, 800 mcd (Yellow), 3 Lumens, 240 mcd (Green)
• Vibration- 3 mm @10~55Hz
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Ambient Humidity- 45-85% Relative Humidity
• Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 54 (Protected from harmful dust deposits and splashing water from any direction)
• Approvals- RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart