The Menics MS56L-F02-Y 56mm LED beacon light is 24V AC/DC with a yellow lens and a steady or flashing light. Direct mount with a lead wire connection. Flash rate of 80/min. A selector switch inside sets the light to operate in steady or flashing mode. This space saving beacon light is ideal for electrical control panels due to the reflector that ensures a bright light. Rated IP 65. Note: See the link to our accessory chart below the description to find out which mounting accessories are compatible with each other.

Specifications

• Power Supply- 24V AC/DC
• Mounting- Wall Mounted (see mounting bracket below)
• Lens Color- Yellow
• Lens Material- Polycarbonate Resin
• Housing Material- ABS Plastic Resin
• Lead Length- 800mm (31.5")
• Light Style- Steady & Flashing
• Current Consumption- 0.12 Amps
• Brightness- 11 Lumens (880 mcd)
• Flash Rate- 80 times per minute
• Buzzer- None
• Dimensions- 86 mm Height x 56 mm Diameter (3.4" x 2.2")
• Vibration- 15~55 Hz; xyz/60min (70m/s², 7G)
• Insulation Resistance- 100 MOhm min (500VDC mega)
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Storage Temperature- -20 C to 70 C (-4 F to 158 F)
• Ambient Humidity- 45-85% Relative Humidity
• Recommended Wire Size- UL1007/22 AWG
• IP Protection- IP 65 (Total protection from dust and water jets from any direction)
• Approvals- RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

Menics MS56L-F02-Y 56mm 24V Yellow LED Beacon Light