 |
Light Efficient Design LED-7324-FC2-G4 9W PL LED CFL Retrofit Lamp, Selectable CCT, Type A/B
One retrofit lamp with three distinct color settings.
Why Choose the LED-7324-FC2-G4 PL LED Retrofit Lamp?
The Light Efficient Design LED-7324-FC2-G4 is a 9W G24q four pin LED retrofit lamp with 1,400 lumen output. It offers a practical way to update compatible open CFL fixtures in offices and hotels. The housing switch selects 2700K, 4000K, or 5000K to match the desired appearance of the room. Its Type A/B design works with a listed electronic ballast or a properly rewired direct line voltage connection.
🎨 Selectable Light ColorSet the color temperature with the switch on the lamp housing. 💡 Directional OutputDirect light through the fixture with the specified beam pattern. 🔌 Two Operating MethodsChoose compatible ballast operation or a correctly wired Type B retrofit. 🛠️ Fewer Lamp ChangesThe LED design helps extend the interval between replacements.
⚠️ Confirm Ballast and Fixture Compatibility
Type A operation requires a listed compatible electronic ballast. If the ballast is not compatible, a qualified installer must bypass it and wire the fixture for Type B operation according to the lamp instructions. Direct line operation uses 120–277V AC. Use in open fixtures.
📋 Compatible Electronic Ballasts
Philips / Advance: 2S13-H1-LD, 2S18-H1-LD, 2S26-H1-LD, 2S42-M2-LD
Universal / Triad: C213UNVME, C218UNVME, C2642UNVME
Osram / Sylvania: QTP1/2X18CF/UN DM, QTP 2X26CF/UNV DM
Keystone: KTEB-226-UV-TP-PIC-DW
Key Features & Benefits
- Lower lamp power: Uses less lamp power than the CFL replacement rating for compatible applications.
- Reduced relamping work: Long rated LED life can reduce maintenance visits to replace lamps.
- Color selection: Choose the light appearance at the fixture during setup.
- Existing fixture upgrade: Retain a compatible fixture while replacing its CFL lamp with LED technology.
Technical Specifications
| Brand | Light Efficient Design |
|---|
| Part Number | LED-7324-FC2-G4 |
|---|
| Operating Type | Type A/B: compatible ballast or ballast bypass |
|---|
| Bulb Type | PL LED CFL Retrofit |
|---|
| Base Type | G24q 4 Pin |
|---|
| Dimensions | 5.7" Height x 1.3" Width x 1.3" Depth |
|---|
| Lumens | 1400 |
|---|
| Input Voltage | 120–277V AC or compatible electronic ballast |
|---|
| Power Consumption | 9 Watts |
|---|
| Rated Life | 50,000 hours |
|---|
| Replaces | Up to 42W 4 Pin CFL lamps |
|---|
| Beam Angle | 120° |
|---|
| Dimmable | No |
|---|
| Color Rendering Index (CRI) | 80+ |
|---|
| Color Temperature | 2700K / 4000K / 5000K |
|---|
| Operating Temperature | 40°F to 104°F (-40°C to 40°C) |
|---|
| Approvals | UL & CUL Listed |
|---|
| Warranty | 5 Year Manufacturer's Limited Warranty |
|---|
| Location Suitability | Damp locations |
|---|
| Mounting Orientation | Base up, base down, or horizontal |
|---|
📋 Installation Planning
Check fit: Match the base, lamp dimensions, and permitted fixture type.
Choose mounting: Base up, base down, and horizontal orientations are supported.
Confirm electrical compatibility: Follow the installation instructions for the selected ballast or permitted Type B connection.
🎨 Color Temperature Selection
Available settings: 2700K / 4000K / 5000K.
Use the housing switch to select the required color temperature during installation.
|
|
|
