Why Choose the LED-7322-FC1-G4 PL LED Retrofit Lamp?
The Light Efficient Design LED-7322-FC1-G4 is a 7W PL LED lamp for compatible G24d two pin CFL fixtures. Its 120 degree beam suits horizontal lamp installations in open fixtures used for office and hotel lighting.
The lamp produces 900–950 lumens and offers selectable 3000K, 3500K, or 4000K light. It can operate with a compatible magnetic ballast up to 26W or through a properly wired Type B connection to 120–277V AC.
🎨 Selectable Light Color
Set the color temperature with the switch on the lamp housing.
💡 Directional Output
Direct light through the fixture with the specified beam pattern.
🔌 Two Operating Methods
Choose compatible ballast operation or a correctly wired Type B retrofit.
🛠️ Fewer Lamp Changes
The LED design helps extend the interval between replacements.
⚠️ Confirm Ballast and Fixture Compatibility
Type A operation is limited to compatible magnetic ballasts up to 26W. If the ballast is not compatible, a qualified installer must bypass it and wire the fixture for Type B operation according to the lamp instructions. Direct line operation uses 120–277V AC. Use in open fixtures.
📋 Operating Options
Type A operation uses a compatible magnetic ballast up to 26W. For Type B operation, follow the ballast bypass installation instructions. This two pin model is not dimmable.
Key Features & Benefits
- Lower lamp power: Uses less lamp power than the CFL replacement rating for compatible applications.
- Reduced relamping work: Long rated LED life can reduce maintenance visits to replace lamps.
- Color selection: Choose the light appearance at the fixture during setup.
- Existing fixture upgrade: Retain a compatible fixture while replacing its CFL lamp with LED technology.
Technical Specifications
| Brand | Light Efficient Design |
|---|
| Part Number | LED-7322-FC1-G4 |
|---|
| Operating Type | Type A/B: compatible ballast or ballast bypass |
|---|
| Bulb Type | PL LED CFL Retrofit |
|---|
| Base Type | G24d 2 Pin |
|---|
| Dimensions | 5.2" Height x 1.3" Width x 1.3" Depth |
|---|
| Lumens | 900-950 |
|---|
| Input Voltage | 120–277V AC (or 26W magnetic ballast) |
|---|
| Power Consumption | 7 Watts |
|---|
| Rated Life | 50,000 hours |
|---|
| Replaces | Up to 26W CFL (compact fluorescent) lamps |
|---|
| Beam Angle | 120° |
|---|
| Dimmable | No |
|---|
| Color Rendering Index (CRI) | 80+ |
|---|
| Color Temperature | 3000K / 3500K / 4000K |
|---|
| Operating Temperature | 4°F to 113°F (-20°C to 45°C) |
|---|
| Approvals | UL & CUL Listed |
|---|
| Warranty | 5 Year Manufacturer's Limited Warranty |
|---|
| Location Suitability | Damp locations |
|---|
| Mounting Orientation | Horizontal |
|---|
📋 Installation Planning
Check fit: Match the base, lamp dimensions, and permitted fixture type.
Choose mounting: Install horizontally.
Confirm electrical compatibility: Follow the installation instructions for the selected ballast or permitted Type B connection.
🎨 Color Temperature Selection
Available settings: 3000K / 3500K / 4000K.
Use the housing switch to select the required color temperature during installation.
