 |
Light Efficient Design LED-7320-FC1-G4 10W PL LED CFL Retrofit Lamp, Selectable CCT, Type A/B
Selectable white light for a four pin CFL upgrade.
Why Choose the LED-7320-FC1-G4 PL LED Retrofit Lamp?
The Light Efficient Design LED-7320-FC1-G4 is a 10W PL LED retrofit lamp for compatible four pin CFL fixtures. Its quad tube design distributes light in all directions, making it useful for general lighting in office rooms and hotel corridors. A switch on the housing selects 3000K, 3500K, or 4000K light to suit the space. The lamp produces 1,350–1,460 lumens and supports either a listed electronic ballast or a properly wired Type B installation.
🎨 Selectable Light ColorSet the color temperature with the switch on the lamp housing. 💡 All Around OutputLight spreads around the lamp for general illumination. 🔌 Two Operating MethodsChoose compatible ballast operation or a correctly wired Type B retrofit. 🛠️ Fewer Lamp ChangesThe LED design helps extend the interval between replacements.
⚠️ Confirm Ballast and Fixture Compatibility
Type A operation requires a listed compatible electronic ballast. If the ballast is not compatible, a qualified installer must bypass it and wire the fixture for Type B operation according to the lamp instructions. Direct line operation uses 120–277V AC. Use in open fixtures.
📋 Compatible Electronic Ballasts
Philips Advance: 2S13-H1-LD, 2S18-H1-LD, 2S26-H1-LD, 2S42-M2-LD
Universal Triad: C213UNVME, C218UNVME, C2642UNVME
Osram Sylvania: QTP1/2X18CF/UN DM, QTP 2X26CF/UNV DM
Keystone: KTEB-226-UV-TP-PIC-DW
Key Features & Benefits
- Lower lamp power: Uses less lamp power than the CFL replacement rating for compatible applications.
- Reduced relamping work: Long rated LED life can reduce maintenance visits to replace lamps.
- Color selection: Choose the light appearance at the fixture during setup.
- Existing fixture upgrade: Retain a compatible fixture while replacing its CFL lamp with LED technology.
Technical Specifications
| Brand | Light Efficient Design |
|---|
| Part Number | LED-7320-FC1-G4 |
|---|
| Operating Type | Type A/B: compatible ballast or ballast bypass |
|---|
| Bulb Type | PL LED CFL Retrofit |
|---|
| Base Type | G24q/GX24q 4 Pin |
|---|
| Dimensions | 6.6" Height x 1.4" Width x 1.4" Depth |
|---|
| Lumens | 1350-1460 |
|---|
| Input Voltage | 120–277V AC or compatible electronic ballast |
|---|
| Power Consumption | 10 Watts |
|---|
| Rated Life | 50,000 hours |
|---|
| Replaces | Up to 42W 4 Pin CFL lamps |
|---|
| Beam Angle | 360° omnidirectional |
|---|
| Dimmable | No |
|---|
| Color Rendering Index (CRI) | 80+ |
|---|
| Color Temperature | 3000K / 3500K / 4000K |
|---|
| Operating Temperature | 40°F to 104°F (-40°C to 40°C) |
|---|
| Approvals | UL & CUL Listed |
|---|
| Warranty | 5 Year Manufacturer's Limited Warranty |
|---|
| Location Suitability | Damp locations |
|---|
| Mounting Orientation | Base up, base down, or horizontal |
|---|
📋 Installation Planning
Check fit: Match the base, lamp dimensions, and permitted fixture type.
Choose mounting: Base up, base down, and horizontal orientations are supported.
Confirm electrical compatibility: Follow the installation instructions for the selected ballast or permitted Type B connection.
🎨 Color Temperature Selection
Available settings: 3000K / 3500K / 4000K.
Use the housing switch to select the required color temperature during installation.
|
|
|
