 |
Light Efficient Design LED-7328-FC-G2 16W PL LED CFL Retrofit Lamp, Selectable CCT, Type A/B
Position the light with a rotatable head and selectable color.
Why Choose the LED-7328-FC-G2 PL LED Retrofit Lamp?
The Light Efficient Design LED-7328-FC-G2 is a 16W PL LED retrofit lamp for compatible G24q and GX24q four pin fixtures. It provides 1,750–1,850 lumens, making it an option for replacing CFL lamps up to 42W in school or office interiors. A 90 degree rotatable head helps orient the light within the fixture. Five selectable color temperatures span 2700K to 5000K, and the Type A/B design supports listed electronic ballasts or direct line voltage installation.
🎨 Selectable Light ColorSet the color temperature with the switch on the lamp housing. 🔄 Adjustable DirectionThe rotatable head helps position the light within the fixture. 🔌 Two Operating MethodsChoose compatible ballast operation or a correctly wired Type B retrofit. 🛠️ Fewer Lamp ChangesThe LED design helps extend the interval between replacements.
⚠️ Confirm Ballast and Fixture Compatibility
Type A operation requires a listed compatible electronic ballast. If the ballast is not compatible, a qualified installer must bypass it and wire the fixture for Type B operation according to the lamp instructions. Direct line operation uses 120–277V AC. Use in open fixtures.
📋 Ballast Compatibility
Use the LED-7318 / LED-7328 compatibility table in the linked datasheet. Match the exact ballast model, supply voltage, and number of lamps. Dimming requires a listed compatible dimming ballast.
Key Features & Benefits
- Lower lamp power: Uses less lamp power than the CFL replacement rating for compatible applications.
- Reduced relamping work: Long rated LED life can reduce maintenance visits to replace lamps.
- Color selection: Choose the light appearance at the fixture during setup.
- Positioning flexibility: The 90 degree rotatable head helps align the output with the fixture.
Technical Specifications
| Brand | Light Efficient Design |
|---|
| Part Number | LED-7328-FC-G2 |
|---|
| Operating Type | Type A/B: compatible ballast or ballast bypass |
|---|
| Bulb Type | PL LED CFL Retrofit |
|---|
| Base Type | G24q 4 Pin |
|---|
| Dimensions | 6.8" Height x 2.4" Width x 2.4" Depth |
|---|
| Lumens | 1750-1850 |
|---|
| Input Voltage | 120–277V AC or listed compatible electronic ballast |
|---|
| Power Consumption | 16 Watts |
|---|
| Rated Life | 50,000 hours |
|---|
| Replaces | Up to 42W CFL (compact fluorescent) lamps |
|---|
| Beam Angle | 200° |
|---|
| Dimmable | When Used with Dimmable Ballast |
|---|
| Color Rendering Index (CRI) | 80+ |
|---|
| Color Temperature | 2700K / 3000K / 3500K / 4000K / 5000K |
|---|
| Operating Temperature | 4°F to 113°F (-20°C to 45°C) |
|---|
| Approvals | UL & CUL Listed, DLC Listed |
|---|
| Warranty | 5 Year Manufacturer's Limited Warranty |
|---|
| Location Suitability | Damp locations |
|---|
| Compatible Bases | G24q-1, G24q-2, G24q-3, GX24q-2, GX24q-3, GX24q-4 |
|---|
| Mounting Orientation | Base up, base down, or horizontal |
|---|
📋 Installation Planning
Check fit: Match the base, lamp dimensions, and permitted fixture type.
Choose mounting: Base up, base down, and horizontal orientations are supported.
Confirm electrical compatibility: Follow the installation instructions for the selected ballast or permitted Type B connection.
🎨 Color Temperature Selection
Available settings: 2700K / 3000K / 3500K / 4000K / 5000K.
Use the housing switch to select the required color temperature during installation.
|
|
|
