 |
Light Efficient Design LED-7343-FC-G3 16W 2G11 PLL LED Lamp: 5-CCT Selectable, 1,900–2,000 Lumens
A ballast-bypass 2G11 PLL LED retrofit lamp with 16W power, 1,900–2,000-lumen output, five selectable color temperatures from 3000K to 6500K, and 120–277V AC operation.
A Selectable-White LED Upgrade for 36W PLL replacement applications
The Light Efficient Design LED-7343-FC-G3 replaces a 36W compact fluorescent lamp in compatible 2G11 fixtures while reducing connected load to 16W. A switch near the base selects 3000K, 3500K, 4000K, 5000K, or 6500K, allowing one lamp to match a range of commercial interior lighting plans.
The shatter-resistant glass lens produces 1,900–2,000 lumens through a wide 140-degree beam. The lamp can mount vertically or horizontally, operates inside enclosed fixtures, and connects directly to 120–277V AC after the existing ballast is bypassed.
🎚️ Five Selectable CCTs
Choose 3000K, 3500K, 4000K, 5000K, or 6500K with the switch near the base.
🔧 Ballast-Bypass Wiring
Direct 120–277V AC operation removes the fluorescent ballast from the circuit.
↔️ Flexible Mounting
Approved for vertical or horizontal installation and use in enclosed fixtures.
🛡️ Shatter-Resistant Lens
The glass lens is designed to resist shattering in commercial retrofit applications.
⚠️ Bypass the Existing Ballast
This is a direct-wire retrofit lamp. The fluorescent ballast must be bypassed during installation. The lamp is non-dimmable and should not be connected to a dimming circuit.
📋 Commercial PLL Fixture Conversion
The 15.9 in. lamp is sized for 36W PLL replacement applications. It can be used in enclosed fixtures and mounted vertically or horizontally, making it useful for offices, classrooms, hospitality, healthcare, and other commercial interiors with compatible 2G11 sockets.
Key Features & Benefits
- Removes ballast dependence: Direct-line wiring eliminates the need to maintain the fluorescent ballast after conversion.
- Instant LED output: The lamp reaches full light immediately when switched on.
- Broad distribution: A 140-degree beam spreads light through compatible linear fluorescent fixtures.
- Lower maintenance demand: Up to 50,000 hours of rated life reduces routine lamp replacement.
- Enclosed-fixture capability: The lamp supports compatible enclosed fixtures without limiting installation to open housings.
Technical Specifications
| Part Number |
LED-7343-FC-G3 |
| Brand |
Light Efficient Design |
| Lamp Type |
PLL LED retrofit lamp |
| Base |
2G11 |
| Input Voltage |
120–277V AC; ballast bypass |
| Power |
16W |
| Light Output |
1,900–2,000 lumens |
| Selectable Color Temperature |
3000K / 3500K / 4000K / 5000K / 6500K |
| CRI |
80+ |
| Beam Angle |
140 degrees |
| Dimmable |
No |
| Replaces |
36W compact fluorescent lamp |
| Dimensions |
15.9 in. L × 1.7 in. W × 0.92 in. H |
| Mounting |
Vertical or horizontal |
| Fixture Compatibility |
Enclosed fixtures |
| Operating Temperature |
-4°F to 113°F (-20°C to 45°C) |
| Rated Life |
Up to 50,000 hours |
| Approvals |
UL and CUL Listed |
| Warranty |
5-year manufacturer's warranty |
🔧 Direct-Wire Installation
Disconnect power, bypass the fluorescent ballast, and wire the compatible 2G11 lampholder for 120–277V AC as directed by the product documentation. Select the desired CCT before returning the fixture to service.
|
|
|
