|
The Lumberg Automation 934964004 0980 ESL 199-121 Lion-P is an 8 port 5 pin M12 distribution block IO-Link Master, with 4 digital inputs and eight 5 pin M12 A-coded I/O connections. Also has two 4 pin M12 D-coded bus connections & and two 5 pin M12 L-coded power supply ports. LED indicators show port status.
Features
- Provides multi-protocol support (Profinet & Ethernet/IP)
- Transmit diagnostic data of IO-Link sensors and actuators
- Transmit up to 2 x 16 A per module with M12 L-coded power ports
- Made to stand up to demanding conditions
- Useful for such applications as manufacturing, robotics, transportation, wind power, & water treatment
- Reverse polarity protection
Lumberg Automation 0980 ESL 199-121 Manuals
Specifications
- Dimensions- 225mm Length x 30mm Width x 43mm Height (8.85" x 1.18" x 1.7")
- Device Type- I/O-Link Master
- Protocol- Ethernet/IP, Profinet
- I/O Function- 4 Digital Input / 8 IO-Link
- Bus Connection- 4 Pin D-coded M12 LAN
- Power Supply Connection- 5 Pin L-Coded M12 Power
- I/O Connection- 5 Pin A-Coded M12
- Housing Material- Nickel Plated Die Cast Zinc
- IP Rating- IP 65, IP 67, IP 69K
- Potted- Yes
- Operating Temperature- -20 C to 70 C (-4 F to 158 F)
- Storage Temperature- -25 C to 85 C (-13 F to 185 F)
- Humidity- 5 - 95%
- Mean Time to Failure- 604 years
- Contact Base Material- Gold Plated Copper Alloy
- Contact Bearer Material- Polyamide
- O-Ring- FKM
- Approvals- CE, RoHS, cULus
Profinet
- Number of Connections- 2
- Specification- V2.3X
- Conformance Class- C
- Performance Class- RT (switch supports IRT)
- Netload Class- II
- Transmission Rate- Fast Ethernet (10/100 Mbit/s), Full Duplex
- Transmission Method- 100BaseTX, with auto-negotiation & auto-crossing
- Cycle Time / Update Rate- Min 1 ms
- Addressing- DCP
- Fast Startup- Supported, </= 2000 ms
- Media Redundancy Protocol- Supported, MRP client
- Shared Device- Supported
- Topology Detection- LLDP, SNMP V1
- Easy Device Replacement- Supported, based on LLDP
- Supported Network Protocols- ARP, HTTP, Ping, SNMP V1, TCP/IP
Ethernet/IP
- Number of Connections- 2
- Specification- CIP V3.1x, EIP Adaption of CIP V1.1x
- Transmission Rate- Fast Ethernet (10/100 Mbit/s), Full Duplex
- Transmission Method- 100BaseTX, with auto-negotiation & auto-crossing
- Cycle Time / Update Rate- Min 1 ms
- Addressing- BootP, DHCP, Rotary Address Switches
- Address Switches Range- 0 to 255 dec
- Connection Types- Exclusive Owner, Input Only, Listen Only
- CIP Msg Connection Limit- 6
- CIP I/O Connection Limit- 3
- Device Level Ring- Supported, Beacon based
- Quick Connect- Not Supported
- Supported Network Protocols- ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP
Power Supply Connection Module Supply
- Number of Connections- 2
- Current Carrying Capacity- Max 16 Amps
- Nominal Voltage- 24V DC (18-30V DC)
- Current Consumption- 180 mA @ 24V DC
Connection Sensor Supply
- Current Carrying Capacity- Max 16 Amps
- Nominal Voltage- 24V DC (18-30V DC)
Connection Actuator Supply (via Module Supply Connection)
- Current Carrying Capacity- Max 16 Amps
- Nominal Voltage- 24V DC (18-30V DC)
IO-Link Master Channels
- Number of Channels- Up to 8, configurable
- IO-Link Class A Ports- 4 (1-4)
- IO-Link Class B Ports- 4 (5-8)
- IO-Link Specification- V1.1.2
- Parameter Storage- Supported
- Supported COM Modes- 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)
- Cycle Time/Update Rate- min. 8 ms for all channels at 32 Byte IN / OUT
- Nominal Voltage- 24 V DC via US (system power supply)
- Nominal Current C/Q (Pin 4)- max. 500 mA (via US)
- Nominal Current 1L+ (Pin 1)- max. 500 mA (via US)
- Nominal Current 2L+/Uaux (Pin 2, B Ports)- max. 4 A per module (via Uaux)
- Perm. Conductor Length to Device- </= 20 M
Digital Input Channels
- Number of Channels- Up to 12, configurable
- Number of Ports- 8
- Channel Type- Type 1 according to IEC 61131-2
- Input Wiring-2, 3 wire
- Nominal Voltage- 24V DC
- Nominal Current- 3 mA
- Sensor Current Supply- Max. 500 mA per port via 1L+
- Sensor Type- PNP
- Input Voltage Range- -0.3V DC to 5 V DC (0 signal), 15V DC to 30V DC (1 signal)
- Protective Circuit- Electronically: Overload Protection, Short-circuit Protection
Digital Output Channels
- Number of Channels- Up to 8, configurable
- Number of Ports- 8
- Channel Type- P-Switching
- Output Wiring- 2 wire
- Nominal Voltage-24V DC
- Output Current per Channel- Max 0.5 Amps (Pin 4)
- Output Current per Module- Max 9 Amps
- Protective Circuit- Electronically: Overload protection, short-circuit protection
- Overload Behavior- Auto off and on switching / Manual restart
Electrical Isolation
- US (System Supply Voltage) / FE- 500V DC
- Uaux / FE- 500V DC
- Bus Connection / FE: 2000V DC
EMC Conformance
- EMC Directive-2014/30/EU
- EN 61000-4-2 Electrostatic Discharge (ESD)- Criterion B; 4 kV contact discharge, 8 kV air discharge
- EN 61000-4-3 Electromagnetic Field- Criterion A; Field intensity: 10 V/m
- EN 61000-4-4 Fast Transients (Burst)- Criterion B, 2 kV
- EN 61000-4-5 Surge Voltage- Criterion B; DC supply lines: +/-0.5 kV / +/-0.5 kV (symmetrical/asymmetrical); For I/O ports with cables less than or equal to 30m
- EN 61000-4-6 Conducted immunity- Criterion A; Test voltage 10 V
- EN 55022 Radio Interference Properties- Class A
Lumberg Automation IO-Link Master M12 Distribution Block
|
|
|