 |
 |
 |
|
The Suns SN6118-SP-A (AB) safety limit switch has a zinc die cast housing with an adjustable 50 mm rubber roller. 1/2" NPT single conduit and 1NO/1NC snap action contact block. It has galvanically separated contacts with a positive opening for the NC contact. 4 x 90 degree actuator positions. These limit switches are found in a large variety of applications and industries, including industrial automation, packaging, material handling, and construction equipment.
- Grounding surface on same level as switching
- Adjusting screw offers closer adjusting of switching point
- Self lifting clamps for the screw terminals make for more efficient wiring
- Meets the standard set by EN 50041
Specifications
- Conduit- 1/2" NPT
- Body Style- Single Conduit
- Contact Block- 1NO/1NC Snap Action
- Operation- Adjustable 50mm Rubber Roller
- Housing Dimensions- 40mm Width x 42mm Depth x 78mm Height
- Operating Speed- 0.05mm-2m/sec
- Operating Frequency- Mechanical: 120 ops/min Electrical: 30 ops/min
- Insulation Resistance- > 100MOhm @ 500 VDC
- Contact Resistance- < 25mOhm
- Rated Current/Voltage- 10 A / 600 VAC
- Electrical Rating- UL/cUL Listed(E216958) for AC15 A600/ DC13 Q300
- Dielectric Strength-1000VAC for 1 min between non-continuous terminals
2500VAC for 1 min between each terminal and ground
- Lifespan- Mechanical: 10,000,000 Electrical: 500,000
- Operating Temperature- -25 - 80 C (-13 - 176 F) without formation of ice
- Humidity- < 95% RH
- Protection Class- IP 67 (Total protection from dust and temporary immersion in water - 1 meter (3.28') for up to 30 minutes)
- Approvals- UL, CUL, CSA, CE, CCC
Suns SN6118-SP-A (AB) Metal Safety Limit Switch with Rubber Roller
|
|
|
 |
|
 |
|
