Overview
The
Kacon KXM-301 light-duty limit switch combines a push plunger actuator with a 1NO/1NC, SPDT snap-action contact arrangement for dependable machine position detection. Its plastic cover over an aluminum housing supports use on compact industrial automation equipment.Push Plunger1NO/1NC, SPDT snap-actionIP65
The push plunger is suited to direct linear contact, providing repeatable switching when a moving component reaches a defined stop or endpoint. The switch can provide endpoint confirmation, equipment interlocking, and position feedback when installed within its specified electrical, mechanical, and environmental ratings.
⚙️ Reliable Industrial Position Sensing
Actuation: Push Plunger for model-specific machine contact.
Switching: 1NO/1NC, SPDT snap-action contacts rated 6 A at 250 VAC (resistive load).
Service Life: 300,000 electrical operations; 10,000,000 mechanical operations.
Key Features
- Compact dimensions: 28 mm W × 100.5 mm L × 25 mm D (1.1 in. × 3.96 in. × 0.98 in.)
- IP65 enclosure protection: dust-tight and protected against low-pressure water jets
- Plastic cover over an aluminum housing: designed for industrial machine environments
- Silver alloy: dependable switching contact construction
- -20°C to 60°C (-4°F to 140°F): operating temperature range
- CE, CCC
✅ Why Choose the KXM-301?
The KXM-301 pairs a
push plunger actuator with IP65 protection and a 1NO/1NC, SPDT snap-action contact arrangement. It is a practical choice when the application calls for light-duty mechanical position detection with clearly defined electrical and environmental ratings.
Applications
Use the Kacon KXM-301 for position, endpoint, and interlock sensing in applications such as:
- Packaging machine endpoint detection
- Small conveyor stop sensing
- Assembly fixture position confirmation
- Machine guard and door monitoring
- Light-duty equipment interlocks
⚠️ Important Installation Information
Environmental protection: IP65 is rated for dust-tight and protected against low-pressure water jets.
Mechanical setup: Avoid excessive actuator travel or impact beyond the specified installation requirements.
Performance Benefits
- Repeatable machine position and endpoint feedback
- Separate normally open and normally closed contact functions
- Long mechanical service life for repeated actuation
- Model-specific enclosure protection for industrial environments
🔎 Selection Reminder
Select the actuator, electrical rating, dimensions, and IP protection required by the application.
