Home > Liquid Tight Cable Glands > Cable Gland Accessories > Seal & O-Rings > PG Seal & O-Rings >

Sealcon OR-36-VT PG 36 Viton O-Ring

OR-36-VT
Sealcon OR-36-VT PG 36 Viton O-Ring


 
Alternative Views:


Our Price: $6.92
MFG P/N: OR-36-VT
MFG: Sealcon
Weight (lbs): 0.006

Product Code: OR-36-VT
Qty:

  
Description
 

Sealcon OR-36-VT high quality Viton O-Rings are liquid tight to 150 psi. PG 36 Thread. Sold Individually. Also known as Hummel # 1.321.3600.21.

Thread Size/Type PG 36
  • Viton Material
  • Operating Temperature - -40 F to 392 F (-40 C to 200 C)
  • Submersible to 300 Ft - NEMA 4x & 6 (IP68 / IP 69 K)
  • 150 PSIG (10 Bar) Rating
  • RoHS & Deca BDE approval
Inner Diameter 1.73" (44 mm)
Height .08" (2 mm)

The Straight Strain Relief fittings feature a molded O-Ring groove. The Snap Elbows and some of the Conduit Fittings do not have recess for an O-Ring. In that case, the Seal Ring would be the best choice, unless the hole can be beveled to accommodate an O-Ring. If NEMA 4x or 6 (European IP 68 - submersible) is required, O-Rings or Seal Rings should be used when mounting Strain Relief Fittings to a control panel, secured with a locking nut. Viton is a federally registered trademark of DuPont Dow Elastomer.

Sealcon PG 36 Viton O-Ring