Sealcon SR-16-HD high quality fiber reinforced plastic seal rings are liquid tight to 150 psi. PG 16 Thread. Sold Individually. Also known as Hummel # 1.325.1600.20.
Specifications
- Thread Size/Type: PG 16
- Inner Diameter: .89" (22.5 mm)
- Outer Diameter: 1.06" (27 mm)
- Height: .06" (1.5 mm)
Features
- Fiber Reinforced Plastic Material
- Operating Temperature - -40 F to 572 F (-40 C to 300 C)
- Submersible to 300 Ft - NEMA 4x & 6 (IP68 / IP 69 K)
- 150 PSIG (10 Bar) Rating
- RoHS & Deca BDE approval
The Straight Strain Relief fittings feature a molded O-Ring groove. The Snap Elbows and some of the Conduit Fittings do not have recess for an O-Ring. In that case, the Seal Ring would be the best choice, unless the hole can be beveled to accommodate an O-Ring. If NEMA 4x or 6 (European IP 68 - submersible) is required, Seal Rings should be used when mounting these fittings to a control panel, secured with a locking nut.
Sealcon PG 16 Fiber Reinforced Plastic Seal Ring