The Sealcon M23 rear mounted single hole signal connector features a 9 pole insert and male threads. The body is die cast copper-zinc with a nickel plated brass surface and gold plated brass alloy contacts. Housing has M25 x 1.5 thread. Insert takes eight 1mm contacts and one 2mm contact. Housings, male/female inserts & optional crimp contacts are selected based on customer preference. Male and female inserts can be used in the same type of housing, which increases flexibility. Operating temperature: - 40 C to 125 C (- 40 F to 257 F). Rated IP 67 / IP 69K, NEMA 4x. Note: Image is for reference, actual part may differ.

Features

• Tools are not necessary to install or remove crimp contacts - Reduces risk of damage to the insert or contacts caused by repeated installation or removal. The Euro Lock System inside the insert keeps the contacts in place
• Crimp contacts machined
• Solder contacts for dip soldering for PC boards
• SLS (Spring Loaded Sockets) for high vibration areas - Socket contacts have an integrated spring to increase the reliability of the connection and add support, up to 50g of shock and 10g continuous force.
• Color coded spacers for male and female inserts
• UL & CSA approvals
• RoHS & Deca BDE compliant

Inserts
Contact Diameter- 1mm (8), 2mm (1)
Nominal current- 8 A (1mm), 20 A (2mm)
Nominal voltage (Degree of protection 2)- 500 V
Nominal voltage (Degree of protection 3)- 200 V
Test voltage (Breakdown voltage)- 2500 V
Insulation resistance- >10 MOhm
Max. contact resistance- 3 mOhm
Crimp Contacts Crimp Range
7.010.901.031: 0.08 mm² - 0.56 mm², AWG 28 - AWG 20
7.010.901.001: 0.14 mm² - 1.0 mm², AWG 26 - AWG 17
7.010.901.012: 0.08 mm² - 0.56 mm², AWG 28 - AWG 20
7.010.901.002: 0.34 mm² - 1 mm², AWG 22 - AWG 17
7.010.901.021: 1 mm² - 1.5 mm², AWG 17 - AWG 16
7.010.901.022: 0.75 mm² - 1.5 mm², AWG 18 - AWG 16
7.010.902.001: 0.75 mm² - 2.5 mm², AWG 18 - AWG 14
7.010.902.002: 0.75 mm² - 2.5 mm², AWG 18 - AWG 14

HOW TO ORDER

1. Select a housing - Panel connector housing includes Jam Nut M25 x 1.5.
2. Select an insert - 9 pole male (pin) and female (socket) inserts are available with dip solder contacts or no contacts (for crimping).
3. Select optional crimp contacts - Choose from either 1mm pin or socket crimp contacts (sold in sets of 8). Then select either a 2mm pin or socket crimp contact. Please Note: Separate contacts are not required for inserts with soldered contacts (choose the No Contacts Required options)

Rear Mount M23 Single Hole 9 Pole Connector with Male Threads