|
Sealcon CF21CR-BK high quality black nylon cord grip with elongated thread is designed for the toughest applications. Also known as Hummel 1.293.2101.61. Sold Individually.
Locking nut & O-Ring sold separately
Specifications
- Thread Size: PG 21
- Cable O.D. Range: .35" - .63" (9 - 16 mm)
- Through Hole Diameter: 1.12" (28.4 mm)
- Body Length: 4.49" (114 mm)
- Thread Length: .59" (15 mm)
- Wrench Flat Dome: 1.30" (33 mm)
- Wrench Flat Body: 1.30" (33 mm)
Features
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP 69 K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Approvals
- RoHS Compliance
- Deca Bde Deca-Bromo-Diphenyl-Ether Compliance
- Registration, Evaluation, Authorization and Restriction of Chemicals
- Waste Electrical and Electronic Equipment Directive
- UL / CUL Listed
- UL Registered
- EAC
- CE
- German Lloyd
- V0 UL94 Rated / Approved
Sealcon PG 21 Nylon / Plastic strain relief fittings, also referred to as cable glands or cord grips, are used when connecting cable or wire to different applications in nearly any industry. This cord grip can provide a NEMA 4x & 6 (IP 68 & 69K), 150 PSIG (10 bar) Liquid Tight Rating. Elongated threads are used when the cable gland needs to go through a thick wall, or simply if a longer thread length better serves the application. Sealcon has patented overlapping clamping splines & recessed custom grommets to protect your cable from damage and the elements. Flex nuts work to keep the cable from kinking and chafing. The CF21CR-BK applies a concentric force on all points of the cable, providing a substantial amount of Pull-out resistance.
Sealcon CF21CR-BK Reduced Insert PG 21 Elongated Cord Grip
|
|
|