 |
 |
 |
|
Menics PMEF-2FF-RG PME 2-stack LED Tower Signal Light: Red and Green, 90-240 VAC, 45mm
Preassembled 45mm Menics PME Series signal tower with 2 LED tiers, Red and Green lenses, steady and flashing operation, prism-cut optics, a 25" lead, and IP52 protection.
Clear Machine-Status Indication in a Compact 45mm Tower
The Menics PMEF-2FF-RG 2-stack LED tower light provides Red and Green indication for two machine states, alarms, or process conditions. Each tier supports steady or flashing operation, allowing control designers to distinguish continuous status information from conditions that require immediate attention.
Prism-cut polycarbonate resin lenses distribute the LED output more evenly around the tower. Silver divider bands separate the 2 tiers, while vibration-absorbing rubber helps the preassembled light operate in machinery and equipment applications exposed to vibration up to 3 mm @10~55Hz.
🚦 2 LED Tiers
Red and Green signaling in a compact, preassembled PME Series tower.
✨ Steady & Flashing
Select continuous illumination or a flashing signal at 80 times per minute.
🔆 Prism-Cut Lenses
Optical lens pattern promotes even light distribution for improved visibility around equipment.
⚙️ Vibration-Absorbing Design
Embedded rubber supports operation in high-vibration machinery environments.
⚠️ Confirm Voltage, Mounting Hardware, and Lead Length
This model requires a 90-240 VAC supply and is provided with a 25" lead. Mounting poles, bases, and wall brackets are selected separately. A 750 mm or 1000 mm mounting pole requires a longer lead; the lead can be modified during installation or ordered with a factory modification.
📋 Mounting Options
Pole mount: Combine a compatible pole with a base.
Wall mount: Combine a compatible pole with a wall bracket.
Surface mount: Use the 22 mm MAP-0022 pole with a base, or install the threaded 43 mm MAP-M043 pole through a prepared hole with lock nuts.
Key Features & Benefits
- Preassembled PME Tower: Modular construction simplifies future tier or component replacement
- Red and Green LED Lenses: Provides 2 clearly separated visual signals
- Dual Operating Modes: Supports steady and flashing illumination
- Silver Divider Bands: Visually separates each LED tier
- IP52 Protection: Provides protection from harmful dust deposits and water drops up to 15 degrees from vertical
- No Buzzer: Visual-only signaling for applications that do not require an audible alarm
Technical Specifications
|
Part Number
|
PMEF-2FF-RG
|
|
Brand
|
Menics
|
|
Series
|
PME
|
|
Product Type
|
LED Tower Signal Light
|
|
Power Supply
|
90-240 VAC
|
|
Light Operation
|
Steady & Flashing
|
|
LED Colors
|
Red and Green
|
|
Number of LED Tiers
|
2 Stack
|
|
Current Consumption
|
0.022 A (Red), 0.025 A (Green)
|
|
Brightness
|
10 Lumens, 800 mcd (Red), 4 Lumens, 320 mcd (Green)
|
|
Flashing Rate
|
80 times per minute
|
|
Lead Length
|
25"
|
|
Dimensions
|
167 mm Height x 45 mm Diameter (6.57" x 1.77")
|
|
Lens Material
|
Polycarbonate Resin
|
|
Housing Material
|
ABS Plastic Resin
|
|
Buzzer
|
None
|
|
Vibration
|
3 mm @10~55Hz
|
|
Ambient Temperature
|
-15 C to 40 C (5 F to 104 F)
|
|
Ambient Humidity
|
45-85% Relative Humidity
|
|
Recommended Wire Size
|
1007 UL / 22 AWG
|
|
IP Protection
|
IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
|
|
Approvals
|
CE, RoHS
|
📋 Basic Installation Overview
1. Verify Power: Confirm the control voltage matches 90-240 VAC before wiring.
2. Select Mounting: Choose the compatible pole, base, or wall bracket for the installation surface.
3. Check Lead Length: Confirm that the 25" lead reaches the termination point; extend or request modification for 750 mm and 1000 mm poles.
4. Wire the Signals: Use the recommended 1007 UL / 22 AWG conductors and connect each LED tier for the required steady or flashing operation.
5. Test Operation: Energize and verify each color and operating mode before placing the equipment into service.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
|
|
|
|
|
|
Related Products |
|
Menics MAM-B070D Plastic Base for Tower Lights w/ Gasket, 70mm Diameter
|
|
Menics MAP-0750 Pole for Tower Lights, 20mm Diameter, 750mm (29.53")
|
|
Menics PME-R Red Lens for PME Tower Lights
|
|
Menics MAM-B070R Rotating Plastic Base for Tower Lights, 70mm Diameter
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-0060 Pole for Tower Lights, 20mm Diameter, 60mm (2.36")
|
|
Menics MAP-M240 Threaded Pole for Tower Lights, 20mm Diameter, 240mm (9.45")
|
|
Menics MAP-0240 Pole for Tower Lights, 20mm Diameter, 240mm (9.45")
|
|
Menics PME-G Green Lens for PME Tower Lights
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-DS40-BLK Plastic Wall Bracket for Tower Lights
|
|
Menics MAM-DS25 L-Angle Wall Bracket for Tower Lights
|
|
Menics PME-02-G Green LED Module for PME Tower Lights, 24V & 90-240V
|
|
Menics MAM-B070C Plastic Base for Tower Lights, 70mm Diameter
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-0022 Pole for Tower Lights, 20mm Diameter, 22mm (0.87")
|
|
Menics PME-02-R Red LED Module for PME Tower Lights, 24V & 90-240V
|
|
Menics MAP-1000 Pole for Tower Lights, 20mm Diameter, 1000mm (39.37")
|
|
Menics MAP-M750 Threaded Pole for Tower Lights, 20mm Diameter, 750mm (29.53")
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-M043 Threaded Pole for Tower Lights, 20mm Diameter, 43mm (1.69")
|
|
Menics MAP-M1000 Threaded Pole for Tower Lights, 20mm Diameter, 1000mm (39.37")
|
|
|
|
|
|
|
|
|
|
|
|
|
