You are here: Home > DIN 43650 Form C Connectors
Choose a sub category:
DIN 43650 Form C Hardwired (No Circuit) DIN 43650 Form C Hardwired (With Circuit) DIN 43650 Form C Male
DIN 43650 Form C Molded (No Circuit) DIN 43650 Form C Molded (With Circuit) DIN 43650 Form C to M12 (MDC)
Din 43650 Form C Accessories

DIN 43650 Form C Connectors


Guide to DIN 43650 Connectors

Sort By:
Page of 7
Solenoid Connector HTP Form C Din 43650 Form C Molded, 9.4mm, 2 Pole / 2 Ground - 30" In Stock
Our Price: $1.50
Deal of the Day Price: $0.50
Hirschmann EPDM Gasket Hirschmann GSSNA 300-6 EPDM Gasket In Stock
Our Price: $0.45
   
 

Form C DIN Solenoid Valve connectors are able to fit your needs

DIN Form CDIN 43650 Form C connectors have flat blade pins with 8mm or 9.4mm pin spacing between the #1 and #2 pins.

DIN 43650 standards are a set of standards developed by Deutsches Institut für Normung e.V. (DIN), the German Institute for Standardization. You may also see ISO 4400 (the International Organization for Standardization) and EN 175301-803 ( European Standards) used to describe these connectors. DIN 43650 connectors are primarily used with solenoid valves offering a secure and water resistant method for applying power. The Din 43650 connectors can be found in hydraulics and pneumatics applications as well as marine applications, pressure sensors and switches, optical, limit and proximity switches.

Major Electronix offers a line of Form C DIN solenoid valve connectors that can fit the needs of a number of applications. Also called sensor connectors, they are water resistant and offer several different options. Surge suppression, diodes and various lengths of molded cable can be added to Form C DIN connectors from a number of different manufacturers, including Hirschmann, HTP and Omal. Form C male connectors are panel mount or for molding and can be either 2 + ground or 3 + ground. The hardwired Form C connectors feature PG 7 cable entries and are also 2 + ground or 3 + ground. DIN 43650 Form C connectors with molded cable are 3 + ground or 2 + 2 ground and can come with 2, 3, 5 or 10 meter cable lengths. Circuited versions of the hardwired and molded connectors have options including an LED indicator to confirm the voltage supply and MOV surge suppression or diodes to give overvoltage protection to the source and load. The M12 DIN connectors are fitted to an M12 molded cable plug and can be circuited if necessary. If separate accessories are needed, Major Electronix offers a line of Form C gaskets to fit the Hirschmann and HTP Form C DIN connectors.



DIN 43650 Form C Connector Articles

9/12/2016 - DIN 43650 Connector and Custom Connector Assemblies
1/8/2016 - Specialty HTP DIN 43650 Valve Connectors
2/7/2014 - DIN 43650 Connectors with Circuits
10/9/2013 - DIN 43650 Solenoid Valve Connectors
4/8/2013 - OMAL DIN 43650 Connectors from Mencom