 |
 |
 |
|
HTP DIN 43650 Form C Connector, 8 mm Pin Spacing, 24V AC/DC LED Indicator, PG7
Clear DIN 43650 Form C valve connector with 8 mm contact spacing, 24V AC/DC LED indicator, PG7 cable entry for 4-6.5 mm cable, screw contacts, NBR profile gasket, and IP65 protection.
Why Choose This HTP DIN 43650 Form C Connector?
This HTP DIN 43650 Form C connector is built for compact solenoid valve and industrial control wiring where a clear housing and voltage indication make troubleshooting easier. The integrated 24V AC/DC LED indicator confirms voltage supply directly at the connector.
The connector uses 8 mm pin spacing, PG7 cable entry, screw contacts with conductor protection, and a ground connection jumpered at the 12 o'clock position. It includes the connector, center screw, and NBR profile gasket for a secure IP65 installation.
💡 24V AC/DC LED
Built-in indicator confirms voltage supply at the connector
📏 8 mm Pin Spacing
Form C layout for compatible DIN 43650 valve interfaces
🔌 PG7 Cable Entry
Accepts 4 mm to 6.5 mm cable outside diameter
🛡️ IP65 Protection
NBR profile gasket helps seal the connector in industrial environments
⚠️ Confirm Form C Fit Before Ordering
This connector is designed for DIN 43650 Form C applications with 8 mm contact spacing. Before installation, confirm the valve interface, pin spacing, cable diameter, voltage, and ground orientation.
The ground is jumpered at the 12 o'clock position.
📋 Common Applications
Use this HTP DIN 43650 Form C connector for compact valve wiring in pneumatic controls, hydraulic equipment, solenoid valve circuits, process equipment, machine controls, and automation panels that require a 24V AC/DC LED indicator.
The clear housing helps technicians see the LED status during setup, maintenance, and fault checks.
Key Features & Benefits
- Clear housing for easy LED visibility
- 24V AC/DC LED indicator confirms voltage supply
- Ground jumpered at the 12 o'clock position
- PG7 cable entry accepts 4-6.5 mm cable O.D.
- Screw contacts with conductor protection
- NBR profile gasket included
- IP65 protection class
- CE and RoHS approved
- Includes connector, center screw, and NBR profile gasket
Technical Specifications
|
Manufacturer
|
HTP
|
|
Product Type
|
DIN 43650 Form C Connector
|
|
Housing Color
|
Clear
|
|
Circuit Type
|
24V AC/DC LED Indicator
|
|
Type of Contact
|
Screw with conductor protection
|
|
Contact Spacing
|
8 mm
|
|
Number of Poles
|
2 Poles + Ground
|
|
Ground Position
|
Jumpered at the 12 o'clock position
|
|
Cable Entry
|
PG7
|
|
Cable O.D. Range
|
4 mm to 6.5 mm
|
|
Maximum Conductor Size
|
.75 mm
|
|
Fixing Screw
|
M2.5 x 28.5 mm
|
|
Gasket
|
NBR Profile
|
|
Operating Temperature
|
-22°F to +176°F
|
|
Protection Class
|
IP65
|
|
Approvals
|
CE, RoHS
|
|
Included Components
|
Connector, center screw, and NBR profile gasket
|
📋 Basic Installation Overview
1. Confirm Interface: Verify that the valve or device uses DIN 43650 Form C with 8 mm pin spacing.
2. Check Cable Size: Use cable with an outside diameter between 4 mm and 6.5 mm for the PG7 cable entry.
3. Wire Contacts: Terminate conductors using the screw contacts with conductor protection.
4. Install Gasket: Place the NBR profile gasket between the connector and device interface to support the IP65 seal.
5. Secure Connector: Fasten the connector with the included M2.5 x 28.5 mm center screw.
Always disconnect power before wiring and follow applicable electrical codes for the equipment and installation environment.
📦 What's Included
• HTP DIN 43650 Form C connector
• Center screw
• NBR profile gasket
📞 Application Support
Need help confirming fit?
Check the connector form, contact spacing, voltage, cable O.D., ground position, and gasket requirement before replacing an existing DIN valve connector.
This HTP Form C connector is commonly used when a compact DIN valve connector with visible 24V AC/DC status indication is needed.
|
|
|
 |
|
 |
|
