The Menics PREF-301-RYG 3 tier 56mm diameter LED tower signal light is rated for 12V AC/DC. It has red, yellow, & green lenses with a flashing light and is prewired with 25" lead. Prism cut PC plastic lenses provide a consistent distribution of light. Silver bands clearly define each tier. PRE series tower lights arrive preassembled. Rated IP 56.

Mounting (See mounting accessories below)

• Pole Mount: Pole + Base
• Wall Mount: Pole + Wall Bracket (MAP-DS40), Pole + 70 mm Base + Wall Bracket (MAP-DS30 or MAM-DS28), or Threaded Pole + Wall Bracket (MAM-DS25)
• Surface Mount: 22 mm Pole (MAP-0022) + Base or Threaded 43 mm Pole (MAP-M043). Threaded pole would be inserted into a pre-drilled hole using lock nuts on either side to tighten in place.
• See our mounting accessories chart (link below description) to see which poles and bases are compatible
• Note: If you are using a 750 mm or 1000 mm pole, you will need a longer lead length. The lead can be modified yourself, or by the factory upon request

Specifications

• Operation- Flashing
• Power Supply- 12V AC/DC
• Mounting/Connection- Pole Mount / Lead Wires (25" Lead Length)
• Lens Colors- Red Yellow & Green
• Lens Material- Polycarbonate
• Number of LED Tiers- 3 Tiers
• Dimensions (Tower Light Only)- 232 mm Height x 56 mm Diameter (9.13" x 2.2")
• Current- 0.169 Amps
• Insulation Resistance- 100MOhm min (500VDC mega)
• Flash Rate- 80 times per minute
• Vibration- 10~55Hz, amplitude 0.75mm
• Ambient Temperature- -15 C to 40 C (5 F to 104 F)
• Storage Temperature- -15 C to 40 C (5 F to 104 F)
• Recommended Wire Size- 1007 UL / 22 AWG
• IP Protection- IP 56 (Protection from harmful dust deposits and powerful water jets from any direction)
• Approvals- CE, RoHS

Find out which mounting accessories you need with our Menics Signal Light Mounting Accessory Chart

PREF-301-RYG 12V AC/DC 3 Tier Flashing LED Tower Signal Light