 |
 |
 |
|
Saginaw Control & Engineering SCE-2PBXSS is a 2 position extra deep push button enclosure. It is made from 0.063" 304 stainless steel with a #4 brushed finish and two 30.5mm pushbutton entrances in a 1x2 layout. Ideal for keeping oil-tight push buttons, switches, and pilot lights protected when located in a corrosive environment or in hose down applications.
- 6" H x 4" W x 4.75" D (152.4mm x 101.6mm x 120.65mm)
- Continuously welded seams
- Cover screws thread into sealed wells
- Compatible with any brand of oil-tight push buttons, switches, or pilot lights
- 4 way standard push button entrances
- Oil / water resistant gasket
- Cover can be removed
- Welded mounting provision located on the back at the top and bottom
- IS5 industry standards - NEMA Type 4, 4x, 12 and Type 13, UL Listed Type 4, 4x, and 12, CSA Type 4, 4x, and 12, IEC 60529, IP 66
|
|
|
 |
|
 |
|
