 |
LiteCycle SG-TB-15PT-GS 15 Circuit Terminal Enclosure, Gray ABS, 120V AC, 15A
A compact terminal enclosure for machine control wiring.
✅ Circuit Capacity and Fit
This enclosure supports 15 circuits with 30 terminations and accepts 14–20 AWG wire. Confirm the 170 mm x 75 mm x 55 mm dimensions against the installation space. Electrical ratings are 120V AC, 60 Hz, and 15A.
Why Choose the LiteCycle SG-TB-15PT-GS Terminal Enclosure?
The LiteCycle SG-TB-15PT-GS provides an enclosed junction point for 15 control circuits in machinery and robotic equipment. Its gray ABS base and solid cover keep the wiring contained within a compact 170 x 75 x 55 mm housing. The integrated block has 30 screw terminations for 14–20 AWG conductors. Molded knockouts simplify cable entry preparation, while the removable cover allows access during wiring changes or maintenance.
🔗 Integrated ConnectionsKeep related wiring junctions together in one enclosure. 🏠 Solid CoverKeep the terminal block and wiring enclosed during normal use. 🔧 Molded KnockoutsPrepare cable entries at the designated knockout locations. 🛠️ Maintenance AccessRemove the cover when connection changes or servicing are needed.
Key Features & Benefits
- Simplified junction layout: The integrated terminal block combines the connection point and housing in one assembly.
- Inspection access: The removable cover allows the terminal area to be reached for wiring checks and maintenance.
- Entry preparation: Molded knockouts help reduce enclosure preparation work at the designated cable entry points.
- Accessible screw connections: The terminal block provides a defined connection point for equipment and control wiring.
Specifications
| Brand | LiteCycle |
|---|
| Part Number | SG-TB-15PT-GS |
|---|
| Product Type | Enclosure with integrated terminal block |
|---|
| Dimensions | 170 mm Length X 75 mm Width X 55 mm Height (6.7" x 2.95" x 2.16") |
|---|
| Housing Color | Gray |
|---|
| Base Material | ABS Plastic |
|---|
| Cover Material | ABS Plastic |
|---|
| Connection Capacity | 14-20 AWG |
|---|
| Wire Entry | Molded Knockout |
|---|
| Entry Opening | 13/16 in (20 mm) |
|---|
| Maximum Size | 1/2 inch NPT |
|---|
| Terminations | 30 |
|---|
| Circuits | 15 |
|---|
| Rated Voltage | 120V AC |
|---|
| Rated Frequency | 60 Hz |
|---|
| Rated Current | 15 Amps |
|---|
| Ingress Protection | IP65 when used with an IP65 cable gland |
|---|
| Approvals | UL 508A:2005, CE |
|---|
📦 Enclosure Assembly
• LiteCycle SG-TB-15PT-GS enclosure
• Integrated terminal block
• ABS plastic cover
⚠️ IP65 Cable Gland Requirement
The IP65 rating applies when the enclosure is used with an IP65 cable gland. Select suitable glands for the cable entries and maintain the enclosure seals during installation.
Keep the application within the stated 120V AC, 60 Hz, and 15A ratings.
🔧 Installation Planning
Plan the entries: Use the molded knockouts for the listed 13/16 inch (20 mm) openings and fittings up to 1/2 inch NPT. Check fitting dimensions before installation.
Match the wire: Use conductors within the listed 14–20 AWG connection capacity.
Check cover access: Leave room to remove the cover for wiring and maintenance.
⚙️ Typical Applications
Control connections and wiring trunking for machinery, robotics, and control systems. Solar equipment applications must remain within the stated electrical ratings.
|
|
|
