 |
Sealcon PG9 Gray Nylon Multi-Hole Cable Gland, 2 x 3 mm Holes, IP65 / NEMA 4X
This gray Nylon 6/6 PG9 multi-hole cord grip seals two cables through one enclosure opening. Its two 3 mm insert holes provide a clean cable entry for paired sensor, control, communications, and instrumentation wiring.
Why Choose the CD09A2-GY Cable Gland?
This gray Nylon 6/6 PG9 multi-hole cord grip seals two cables through one enclosure opening. Its two 3 mm insert holes provide a clean cable entry for paired sensor, control, communications, and instrumentation wiring.
The self-locking ACME dome resists vibration and applies even compression to the elastomer insert. The lightweight nylon body is durable, halogen-free, phosphorus-free, UL 94 flame protected, and resistant to salt water and common industrial chemicals and oils.
🔌 Two Cable Openings
Two 3 mm holes route a cable pair through one PG9 entry
🎨 Gray Nylon Body
Gray Nylon 6/6 blends with control cabinets and equipment enclosures
🔒 Vibration Resistant
Self-locking ACME dome helps maintain compression
💧 IP65 / NEMA 4X
Higher protection is possible only with an ideal cable fit
⚠️ Confirm Cable-to-Hole Fit
For IP65 performance, each cable should be at least 80% of the 3 mm hole diameter, and the cable-to-hole difference must not exceed 0.04 in. (1 mm). IP68 / NEMA 6 is possible only with an ideal fit and should be verified for the application. Locking nut and O-ring are sold separately.
📋 Compact Two-Cable Routing
Use this gray PG9 gland for sensor pairs, controls, compact machinery, communications equipment, lighting systems, and panels where two cables need to share one sealed entry point.
Key Features & Benefits
- Self-locking ACME dome helps resist vibration
- IP65 and NEMA 4X with correctly sized cables
- IP68 and NEMA 6 possible with an ideal cable-to-seal fit
- UL 94 flame-protected, halogen-free, and phosphorus-free materials
- Approvals and conformity: RoHS, Deca BDE, REACH, WEEE, UL Registered, EAC, CE, and Germanischer Lloyd
Technical Specifications
| Product Code | CD09A2-GY |
|---|
| Hummel Part Number | 1.597.0901.00 |
|---|
| Insert Part Number | 1.089.0901.19 |
|---|
| Product Type | Multi-hole cord grip / cable gland |
|---|
| Color / Material | Gray Nylon 6/6 |
|---|
| Seal Material | Elastomer |
|---|
| Thread Size | PG9 |
|---|
| Number of Holes | 2 |
|---|
| Hole Diameter | 0.12 in. (3 mm) each |
|---|
| Through-Hole Diameter | 0.60 in. (15.2 mm) |
|---|
| Body Length | 0.87 in. (22 mm) |
|---|
| Thread Length | 0.31 in. (8 mm) |
|---|
| Wrench Flats | 0.75 in. (19 mm) |
|---|
| Ingress Protection | IP65 / NEMA 4X; IP68 / NEMA 6 possible with ideal fit |
|---|
| Quantity | Sold individually |
|---|
Installation & Selection Guidance
Measure both cables before ordering and confirm the PG9 panel entry. Both cables must meet the fit rule so the insert can compress uniformly and maintain environmental protection.
What’s Included
Includes one gray nylon PG9 multi-hole cord grip with two-hole elastomer insert. Locking nut and O-ring are not included and are sold separately.
|
|
|
