 |
Sealcon PG9 Black Nylon Multi-Hole Cable Gland, 2 x 3 mm Holes, IP65 / NEMA 4X
This black Nylon 6/6 PG9 multi-hole cable gland seals two cables through one enclosure opening. Its two-hole insert provides 3 mm cable openings for paired sensor leads, control wiring, communications lines, and other compact multi-cable installations.
Why Choose the CD09A2-BK Cable Gland?
This black Nylon 6/6 PG9 multi-hole cable gland seals two cables through one enclosure opening. Its two-hole insert provides 3 mm cable openings for paired sensor leads, control wiring, communications lines, and other compact multi-cable installations.
A vibration-resistant, self-locking ACME dome compresses the elastomer insert evenly around both cables. The lightweight nylon body is durable, halogen-free, phosphorus-free, UL 94 flame protected, and resistant to salt water and a broad range of common industrial chemicals and oils.
🔌 Two Cable Openings
Two 3 mm insert holes route a cable pair through one PG9 entry
🧰 Black Nylon 6/6
Lightweight body provides durable enclosure cable management
🔒 Self-Locking Dome
ACME-thread dome helps resist loosening under vibration
💧 IP65 / NEMA 4X
IP68 / NEMA 6 is possible when cable fit is ideal
⚠️ Confirm Cable-to-Hole Fit
For IP65 performance, each cable should be at least 80% of the 3 mm hole diameter, and the difference between each cable and hole must not exceed 0.04 in. (1 mm). IP68 / NEMA 6 is possible only with an ideal fit and should be verified for the application. Locking nut and O-ring are sold separately.
📋 Two-Cable PG9 Configuration
The paired 3 mm openings make this gland useful for sensors, compact machinery, lighting controls, communications equipment, and panels where two cables must share one sealed PG9 entry.
Key Features & Benefits
- Self-locking ACME dome helps resist vibration
- IP65 and NEMA 4X with correctly sized cables
- IP68 and NEMA 6 possible with an ideal cable-to-seal fit
- UL 94 flame-protected, halogen-free, and phosphorus-free materials
- Approvals and conformity: RoHS, Deca BDE, REACH, WEEE, UL Registered, EAC, CE, Germanischer Lloyd, and V-0 per UL 94
Technical Specifications
| Product Code | CD09A2-BK |
|---|
| Hummel Part Number | 1.597.0901.01 |
|---|
| Insert Part Number | 1.089.0901.19 |
|---|
| Product Type | Multi-hole cord grip / cable gland |
|---|
| Color / Material | Black Nylon 6/6 |
|---|
| Seal Material | Elastomer |
|---|
| Thread Size | PG9 |
|---|
| Number of Holes | 2 |
|---|
| Hole Diameter | 0.12 in. (3 mm) each |
|---|
| Through-Hole Diameter | 0.60 in. (15.2 mm) |
|---|
| Body Length | 0.87 in. (22 mm) |
|---|
| Thread Length | 0.31 in. (8 mm) |
|---|
| Wrench Flats | 0.75 in. (19 mm) |
|---|
| Ingress Protection | IP65 / NEMA 4X; IP68 / NEMA 6 possible with ideal fit |
|---|
| Quantity | Sold individually |
|---|
Installation & Selection Guidance
Measure both cables before ordering. Each cable should meet the 80% minimum-diameter rule and remain within 1 mm of the 3 mm hole diameter so the insert can compress evenly.
What’s Included
Includes one black nylon PG9 multi-hole cord grip with two-hole elastomer insert. Locking nut and O-ring are not included and are sold separately.
|
|
|
