 |
 |
 |
|
Menics PMEF-1FF-B PME 1-stack LED Tower Signal Light: Blue, 90-240V AC, 45mm
Preassembled 45mm Menics PME Series signal tower with 1 LED tier, Blue lenses, steady and flashing operation, prism-cut optics, a 25" lead, and IP52 protection.
Clear Machine-Status Indication in a Compact 45mm Tower
The Menics PMEF-1FF-B 1-stack LED tower light provides Blue visual indication for a single machine or process condition. It supports steady or flashing operation, allowing control designers to distinguish continuous status information from conditions that require immediate attention.
Prism-cut polycarbonate resin lenses distribute the LED output more evenly around the tower. Silver divider bands separate the tier, while vibration-absorbing rubber helps the preassembled light operate in machinery and equipment applications exposed to vibration up to 3 mm @10~55Hz.
🚦 1 LED Tier
Blue signaling in a compact, preassembled PME Series tower.
✨ Steady & Flashing
Select continuous illumination or a flashing signal at 80 times per minute.
🔆 Prism-Cut Lens
Optical lens pattern promotes even light distribution for improved visibility around equipment.
⚙️ Vibration-Absorbing Design
Embedded rubber supports operation in high-vibration machinery environments.
⚠️ Confirm Voltage, Mounting Hardware, and Lead Length
This model requires a 90-240V AC supply and is provided with a 25" lead. Mounting poles, bases, and wall brackets are selected separately. A 750 mm or 1000 mm mounting pole requires a longer lead; the lead can be modified during installation or ordered with a factory modification.
📋 Mounting Options
Pole mount: Combine a compatible pole with a base.
Wall mount: Combine a compatible pole with a wall bracket.
Surface mount: Use the 22 mm MAP-0022 pole with a base, or install the threaded 43 mm MAP-M043 pole through a prepared hole with lock nuts.
Key Features & Benefits
- Preassembled PME Tower: Modular construction simplifies future tier or component replacement
- Blue LED Lens: Provides 1 clearly separated visual signal
- Dual Operating Modes: Supports steady and flashing illumination
- Silver Divider Bands: Visually separates each LED tier
- IP52 Protection: Provides protection from harmful dust deposits and water drops up to 15 degrees from vertical
- No Buzzer: Visual-only signaling for applications that do not require an audible alarm
Technical Specifications
|
Part Number
|
PMEF-1FF-B
|
|
Brand
|
Menics
|
|
Series
|
PME
|
|
Product Type
|
LED Tower Signal Light
|
|
Power Supply
|
90-240V AC
|
|
Light Operation
|
Steady & Flashing
|
|
LED Colors
|
Blue
|
|
Number of LED Tiers
|
1 Stack
|
|
Current Consumption
|
0.025 A
|
|
Brightness
|
2 Lumens, 160 mcd
|
|
Flashing Rate
|
80 times per minute
|
|
Lead Length
|
25"
|
|
Dimensions
|
127 mm Height x 45 mm Diameter (5" x 1.77")
|
|
Lens Material
|
Polycarbonate Resin
|
|
Housing Material
|
ABS Plastic Resin
|
|
Buzzer
|
None
|
|
Vibration
|
3 mm @10~55Hz
|
|
Ambient Temperature
|
-15 C to 40 C (5 F to 104 F)
|
|
Ambient Humidity
|
45-85% Relative Humidity
|
|
Recommended Wire Size
|
1007 UL / 22 AWG
|
|
IP Protection
|
IP 52 (Protection from harmful dust deposits and water drops up to 15 degrees from vertical)
|
|
Approvals
|
CE, RoHS
|
📋 Basic Installation Overview
1. Verify Power: Confirm the control voltage matches 90-240V AC before wiring.
2. Select Mounting: Choose the compatible pole, base, or wall bracket for the installation surface.
3. Check Lead Length: Confirm that the 25" lead reaches the termination point; extend or request modification for 750 mm and 1000 mm poles.
4. Wire the Signals: Use the recommended 1007 UL / 22 AWG conductors and connect each LED tier for the required steady or flashing operation.
5. Test Operation: Energize and verify each color and operating mode before placing the equipment into service.
|
|
|
 |
|
 |
Related Products |
|
Menics MAP-M240 Threaded Pole for Tower Lights, 20mm Diameter, 240mm (9.45")
|
|
Menics MAM-B070R Rotating Plastic Base for Tower Lights, 70mm Diameter
|
|
Menics MAP-0750 Pole for Tower Lights, 20mm Diameter, 750mm (29.53")
|
|
Menics MAP-M750 Threaded Pole for Tower Lights, 20mm Diameter, 750mm (29.53")
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-DS40-BLK Plastic Wall Bracket for Tower Lights
|
|
Menics MAM-B070D Plastic Base for Tower Lights w/ Gasket, 70mm Diameter
|
|
Menics MAP-0240 Pole for Tower Lights, 20mm Diameter, 240mm (9.45")
|
|
Menics MAP-0022 Pole for Tower Lights, 20mm Diameter, 22mm (0.87")
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-0060 Pole for Tower Lights, 20mm Diameter, 60mm (2.36")
|
|
Menics PME-B Blue Lens for PME Tower Lights
|
|
Menics MAM-B070C Plastic Base for Tower Lights, 70mm Diameter
|
|
Menics PME-02-B Blue LED Module for PME Tower Lights, 24V & 90-240V
|
|
|
|
|
|
|
|
|
|
|
|
|
Menics MAP-M043 Threaded Pole for Tower Lights, 20mm Diameter, 43mm (1.69")
|
|
Menics MAP-1000 Pole for Tower Lights, 20mm Diameter, 1000mm (39.37")
|
|
Menics MAP-M1000 Threaded Pole for Tower Lights, 20mm Diameter, 1000mm (39.37")
|
|
Menics MAM-DS25 L-Angle Wall Bracket for Tower Lights
|
|
|
|
|
|
|
|
|
|
|
|
|
