 |
 |
 |
|
Sealcon CD07AR-BK, Black Nylon, Liquid Tight Strain Relief Cord Grip, 1/4" NPT / PG 7, Cable OD .08" - .20" (2 - 5 mm)
CD07AR-BK liquid tight strain relief cord grip / cable gland with Nylon 6/6 Material with Buna-N Seal, 1/4" NPT / PG 7 thread, .08" - .20" (2 - 5 mm) cable OD range, NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating.
Why Choose the Sealcon CD07AR-BK Cable Gland?
The Sealcon CD07AR-BK, also known as Hummel 1.209.0701.15, is a Black Nylon liquid tight strain relief cord grip / cable gland designed to secure cable entry points in demanding equipment and enclosure applications. It uses a 1/4" NPT / PG 7 thread, fits cable O.D. .08" - .20" (2 - 5 mm) and has a .49" (12.5 mm) through-hole diameter. Environmental sealing is listed as Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating.
Use this fitting for control panels, junction boxes, machinery, OEM equipment, and industrial cable entry points. Its design supports resistance to salt water, acids, alkalis, gasoline, and oils, Flame Protected to UL 94 and Halogen and Phosphorous Free.
🔩 Threaded Cable Entry
1/4" NPT / PG 7 thread with .49" (12.5 mm) through-hole diameter
🛡️ Environmental Seal
NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating
⚙️ Material Construction
Nylon 6/6 Material with Buna-N Seal
🔒 Ratchet Dome
Vibration-resistant dome helps maintain clamp force
⚠️ Confirm Cable Fit and Accessories
Locking nut & O-Ring sold separately. Confirm the cable outside diameter is within the .08" - .20" (2 - 5 mm) range before ordering.
📋 Application and Rating Details
The Sealcon CD07AR-BK is built for cable strain relief, sealing, and panel entry applications where thread fit, cable diameter, material, and environmental rating must match the installation.
Rating: Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K); 150 psig (10 bar) Pressure Rating
Chemical Resistance: Resists salt water, acids, alkalis', gasoline & oils.
Key Features & Benefits
- 1/4" NPT / PG 7 thread size
- Cable O.D. range: .08" - .20" (2 - 5 mm)
- Through-hole diameter: .49" (12.5 mm)
- Nylon 6/6 Material with Buna-N Seal
- Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
- 150 psig (10 bar) Pressure Rating
- Flame Protected to UL 94
- Halogen and Phosphorous Free
- Vibration Resistant Ratchet Dome
- Resists salt water, acids, alkalis', gasoline & oils.
- Durable Rugged Construction
- RoHS & Deca BDE, CSA approval
Technical Specifications
|
Product Code
|
CD07AR-BK
|
|
Vendor Part Number
|
CD07AR-BK
|
|
Hummel Number
|
1.209.0701.15
|
|
Brand
|
Sealcon / Hummel
|
|
Product Type
|
Liquid Tight Strain Relief Cord Grip / Cable Gland
|
|
Material / Seal
|
Nylon 6/6 Material with Buna-N Seal
|
|
Color / Finish
|
Black Nylon
|
|
Thread Size
|
1/4" NPT / PG 7
|
|
Cable O.D. Range
|
.08" - .20" (2 - 5 mm)
|
|
Through Hole Diameter
|
.49" (12.5 mm)
|
|
Body Length
|
.83" (21 mm)
|
|
Thread Length
|
.31" (8 mm)
|
|
Wrench Flat Dome
|
.59" (15 mm)
|
|
Wrench Flat Body
|
.59" (15 mm)
|
|
Environmental Rating
|
Submersible to 300 ft. / NEMA 4x & 6 (IP68 / IP69K)
|
|
Pressure Rating
|
150 psig (10 bar) Pressure Rating
|
|
Flame Rating
|
Flame Protected to UL 94
|
|
Compliance / Approvals
|
RoHS Compliance, Deca Bde Deca-Bromo-Diphenyl-Ether Compliance, Registration, Evaluation, Authorization and Restriction of Chemicals, Waste Electrical and Electronic Equipment Directive, UL / CUL Listed, UL Registered, EAC, CE, German Lloyd, V0 UL94 Rated / Approved
|
|
Sold As
|
Each / Sold Individually
|
|
Accessories
|
Locking nut & O-Ring sold separately
|
📋 Basic Installation Overview
1. Confirm Thread: Verify the enclosure or panel opening matches the 1/4" NPT / PG 7 thread and .49" (12.5 mm) through-hole requirement.
2. Match Cable Size: Use cable within the .08" - .20" (2 - 5 mm) outside diameter range.
3. Seat the Seal: Tighten the dome so the clamping insert applies even pressure around the cable without damaging the jacket.
4. Maintain Rating: Use the correct accessory hardware and install to the application requirements to support the listed IP/NEMA rating.
5. Final Check: Inspect the cable entry for pull-out resistance, seal compression, and proper panel fit before operation.
Always verify the Sealcon CD07AR-BK dimensions, cable O.D. range, and accessory requirements before installation.
🔁 Cross Reference
• Conta Clip 22030.1
• Lütze 600870
• Jacob 50.007PA/RSW
• Olflex S2207 (Cable O.D. 0.06"-0.19")
📞 Sealcon / Hummel Product Support
Sealcon Cable Gland Support:
For help matching the CD07AR-BK to a cable diameter, thread size, enclosure material, IP/NEMA rating, or replacement cross reference, contact us before ordering.
Sealcon / Hummel cord grips are used for industrial cable entry, strain relief, and liquid-tight sealing in panels, machinery, and harsh-duty equipment.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Additional Product Information
|
|
|
|
|
|
Related Products |
|
LiteCycle SG-TB-6P15-IS 6 Position, 12 Terminal Enclosure, Ivory, 3.54" x 2.56" x 1.77"
|
|
LiteCycle SG-TB-6P15-GS 6 Circuit, 12 Terminal Enclosure, Gray, 3.54" x 2.56" x 1.77"
|
|
LiteCycle SG-TB-6P15-GC 6 Position, 12 Terminal Enclosure, Gray w/ Clear Cover, 3.54" x 2.56" x 1.77"
|
|
Sealcon NP-07-BK Black 1/4" NPT / PG 7 Locking Nut
|
|
|
|
|
|
|
|
|
|
|
|
|
LiteCycle SG-TB-4P15-IS 4 Position, 8 Terminal Enclosure, Ivory, 3.54" x 1.85" x 1.77"
|
|
Sealcon OR-07-BN 1/4" NPT / PG 7 Buna-N O-Ring
|
|
|
|
|
|
|
|
|
|
|
|
|
